LED Indicator Lights red during transmit, green when receiving a signal Channel Switch Rotate to select a channel. No. 16 is the scanning channel Power Switch / Volume Control Turn clockwise to switch ON the transceiver. Turn counterclockwise to switch OFF transceiver. Rotate to adjust volume.
Adjusting the Volume Hold Monitor button (E) own to listen to audio level while rotating the Power switch/Volume control (A). Rotate Volume Control to increase / decrease the volume. Selecting the Channel Turn the Channel Switch (B) to the desired channel. No. 16 is the Scanning Channel.
* TIME-OUT TIMER (TOT) The TOT limits the length of a users transmission. The purpose of the TOT is to prevent transmitting for a long period of time, causing thermal damage to the radio. And alert will sound when the limit for that transmission has been reached. * SCANNING Scanning is used for hands off monitoring of your favorite frequencies.
This is a function for your receiver only. You will Not transmit the alarm. BATTERY SAVER Reduces the battery power used when not receiving a signal. Battery saver turns on automatically 10 seconds after no signal is received and no operation is being performed.
Voice Prompt - ON / OFF Ch 11, Press / Hold both PTT and MONI, and Power ON Alarm Function ON / OFF (if selected via SW) Ch 15, Press / Hold both PTT and MONI, and Power ON Change Language (CHI / ENG) Ch 16, Press / Hold both PTT and MONI, and Power ON Scan ON / OFF (if option set via software) Ch 1-16, Press / Hold MONI only and Power ON...
Page 7
intermittent. Can't turn on the Check the battery contacts on the radio. If they are broken radio, or it turns or twisted, return your radio to an authorized dealer for on and quickly maintenance. shuts down.
Need help?
Do you have a question about the BF-888S and is the answer not in the manual?
Questions and answers