Subscribe to Our Youtube Channel
Related Manuals for Bel Canto CD3t
Summary of Contents for Bel Canto CD3t
- Page 2 Bel Canto Design Limited. Bel Canto Design Limited assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Trademarks used in this publication: Bel Canto and the Bel Canto logo are registered trademarks of Bel Canto Design Limited.
- Page 3 Explanation of symbols used in this manual or on the TO COMPLETELY DISCONNECT THIS APPARATUS rear/underside of the apparatus: FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE. The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to THE MAINS PLUG OF THE POWER SUPPLY CORD alert the user to the presence of uninsulated SHALL REMAIN READILY ACCESSIBLE.
- Page 4 Fit a new 10 amp BS1362 approved fuse into the carrier GROUNDED. and push the carrier back into the plug. Bel Canto Design Ltd. declare that this product is in conformance The conformity of the designated product with the provisions of with the Low Voltage Directive 73/23/EEC and Electromagnetic...
- Page 5 Bel Canto products are automatically covered by a 90 day factory warranty that covers all internal parts and labor. Register online (http://www.belcantodesign.com/Belcanto_Warranty.html) within 30 days of purchase from an authorized dealer to automatically extend your warranty for 2 years starting from the date of purchase. If you do not have web access, please contact your dealer for assistance.
- Page 6 High speed AES and SPDIF drivers Sharp, bright 4 character display • • Efficient low noise power supply design, • 3Watt typical operating power The sonic performance of the CD3t will begin to stabilize after 100 hours of continuous power up.
- Page 7 Canto Design. If the CD3t is not operated for 1 hour, it automatically goes into a low power sleep mode. This is indicated by a single decimal point in the center of the display. Pressing any control will wake the unit up, clearing and initializing...
- Page 8 Mode Indicator will show the pause or play mode as appropriate. Stop: Indicated by a solid square and will place the CD3t in Stop mode when pressed. The CD3t will reset to track 1 when Play is pressed. PLAY>: Initiates playback of the displayed track.
- Page 9 Variable Output mode. Any other devices that are capable of volume control should be in Fixed Volume mode. Double check all connections to and from the unit before plugging the CD3t into the power source. •...
- Page 10 Disc Compatibility: Red Book CD, CDR, CDRW, Hybrid SACD: CD Layer Digital Outputs Maximum Data Rate/Bit Depth: 44.1kHz/16bit Digital Output types: AES/EBU XLR, SPDIF AES/EBU Digital Output Level: 3V p-p, 110 ohms, 44.1K samples/second SPDIF Digital Output Level: 0.6V p-p, 75 ohms, 44.1K samples/second Additive jitter: <...
- Page 11 version 1.0...
Need help?
Do you have a question about the CD3t and is the answer not in the manual?
Questions and answers