Advertisement
Advertisement
Table of Contents
Related Manuals for Rapid Electronics 400S
Summary of Contents for Rapid Electronics 400S
- Page 2 TABLE OF CONTENTS...
- Page 3 OPERATION TABLE OF CONTENTS O. DOME LIGHT SUPERVISION The alarm has a unique feature which will turn on your vehicles Dome Light as follows Note: Turning “ON” the ignition switch or arming the alarm will turn off the dome light. P.
-
Page 4: Active Anti Car-Jacking
OPERATION OPERATION IMPORTANT NOTICE N. ANTI CAR- JACKING WARNINGS: Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature to the “OFF” setting. This system default setting for car-jacking is “OFF”. ACTIVE ANTI CAR-JACKING: buttons at the same time... -
Page 5: Ajar Warning
OPERATION OPERATION B. LED Status Display Chart: “Panic Mode” Status Status buttons button C. Chirp Indicators D. Parking Light Indicator Display Chart: M. TRIGGER THE ALARM SYSTEM Armed warn-away signal “ON” E. SYSTEM OPERATING CONDITION: siren, horn, parking lights, and dome light will turn on NOISE ABATEMENT CIRCUIT: “Noise Abatement Circuit”... - Page 6 OPERATION OPERATION “Off” [4] Chirps SILENT ARMING / DISARMING: buttons [3] flashes t the same time arm or disarm parking lights only J. VALET MODE: (Disarm or Valet mode) valet/program switch bypass all alarm SHOCK SENSOR BY-PASS: button functions times within 3 seconds “valet mode”...
-
Page 7: Disarming Without A Transmitter
OPERATION OPERATION I. DISARMING WITHOUT A TRANSMITTER Overriding the Alarm without a Password Pin Code: (Factory Default “ARM” [1] chirp Setting) flash [1] time PASSIVE DOOR LOCKING “ON” position automatically lock (The alarm will sound.) 10 seconds valet/program switch. PASSIVE ARMING BY-PASS: button twice, [1] chirp “ON”.
Need help?
Do you have a question about the 400S and is the answer not in the manual?
Questions and answers