Celeros EzSAN XL Series User Manual page 34

Function: Time zone settings
This function allows to set NTP server settings.
Please choose a NTP server (Network Time Protocol: for more info: www.ntp.org)
You may provide a fully qualified host name or IP address. Select time zone
accordingly to your location.
There is also option Continuous adjusting using NTP, this will watch your system time
and will correct it, if the difference between local time and server time has change.
Setting this option on is especially recommended when using domains.
Time setting is very important for the proper function of the server.
You must set gateway and (in case of host name) DNS network settings.
Function: Set time
With this function you can set time and date:
Manual
Just type in time & date using following format: hh:mm:ss yyyy-mm-dd.
Use this PC time
It will pick up the time & date of the PC you run the web browser.
NTP server
It will pick up the time & date from NTP server. In this case please make sure you
have Internet access and proper network setup, especially gateway and DNS. You
can check proper Internet access using ping from the Celeros console (press F1 on
console to find out keyboard shortcuts). To use this option you must set correct
NTP server in function Clock settings.
Time setting is very important for proper functionality of the server.
34