Advertisement
Quick Links
BCO-2000
BCO-3000
Thank you for purchasing this Vollrath Food Processing Equipment. Before operating the equipment, read and familiarize yourself with the
following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging.
Use this packaging to ship the equipment if repairs are needed.
BCO-5000
BCO-6000
Product
Description
Number
BCO-2000 EaziClean
16" Bar Length, 1" Gear
®
BCO-3000 EaziClean
25" Bar Length, 1" Gear
®
BCO-5000 EaziClean
16" Bar Length, 1-1/2" Gear
®
BCO-6000 EaziClean
25" Bar Length, 1-1/2" Gear
®
BCO-7000 EaziClean
25" Bar Length, 1-1/2" Gear
®
BCO-1
Preimum™ 16" Bar Length, 1" Gear
Operator's Manual
EaziClean
Can Opener
®
Premium
Can Opener
™
BCO-7000
Item No. 2350084-1 en Rev 11/10
ENGLISH
ENGLISH
BCO-1
Advertisement
Related Manuals for Vollrath BCO-2000
Summary of Contents for Vollrath BCO-2000
- Page 1 Preimum™ 16” Bar Length, 1” Gear Thank you for purchasing this Vollrath Food Processing Equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging.
-
Page 2: Base Installation
anual rocessing quiPMent afety recautionS Peration Prior to first use, it is important to clean the unit. Wash the unit with warm To ensure safe operation, read the following statements and soapy water and rinse thoroughly to remove the thin protective oil film. understand their meaning. - Page 3 anual rocessing quiPMent 4. Lower the handle (A) to the 90° or DOWN position. See Figure 4. 7. Put the handle (A) to the vertical position. Raise the handle (A) and bar (B) up. Remove the can (C) from the can opener base. See Figure 7. Figure 4.
- Page 4 anual rocessing quiPMent ePlacing the lade ePlacing the Wash new parts with warm, soapy water and rinse thoroughly to remove the thin protective oil film. WARNING To change the gear on EaziClean models: ® Sharp Blade Hazard. 1. Use a tool to hold the old gear and turn the handle assembly in the Blades are sharp and can cause cuts.
- Page 5 Please contact the qualified professional repair service listed below. VOLLRATH Induction Repair Service • 1-800-825-6036 (USA) or www.vollrathco.com When contacting the Authorized Professional Service Center, please be ready with the model number, serial number, and proof of purchase showing the date the unit was purchased.
- Page 6 Spring (BCO-7000) BCO-12 1” Gear (for BCO-2000and BCO-3000) BCO-10 1-1/2” Gear (for BCO-5000, BCO-6000, BCO-7000) BCO-15 Quick Release Replacement Cartridge (for BCO-2000 and BCO-3000) BCO-14 Quick Release Replacement Cartridge (for BCO-5000, BCO-6000, BCO-7000) BCO-16 Blade Screws and O-Ring Washers BCO-11...
- Page 7 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE As The Vollrath Company LLC’s only responsibility and the purchaser’s only remedy, for any breach of warranty, The Vollrath Company LLC will repair or, at its option, replace the defective product or part without charge, except as otherwise provided below: •...
-
Page 8: Warranty Procedure
ONLINE: Register your warranty on-line now at www.Vollrathco.com NO WEB ACCESS: If you do not have access to the web, kindly register by completing the warranty registration form and faxing it to The Vollrath Co. LLC office in the country of purchase.
Need help?
Do you have a question about the BCO-2000 and is the answer not in the manual?
Questions and answers