1. Manuals
  2. Brands
  3. Lumberg-Jetter Manuals
  4. Network Router
  5. IP67
  6. Description & operation

Lumberg-Jetter IP67 Description & Operation

Ethernet-switch
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Enlarged version
Order No.
0982 EEC 100
Description and operating
instructions
IP67 ETHERNET-Switch
The IP67 Ethernet switch has been especially designed for use in
industrial environments. It supports ETHERNET10 MBit/s and Fast
ETHERNET 100 MBit/s.
The Ethernet switch modules support switched ETHERNET
networks in accordance with IEEE standard 802.3 (10BASE-T) or
802.3u (100BASE-TX) using copper technology.
The switch modules are fitted at the installation site using screws.
The switch modules have five 10/100 Mbit/s twisted pair ports
(10BASET/100BASE-TX, shielded M12 connectors).
It is possible to connect up to five DTEs (data terminal equipment)
or other TP/TX network segments to these ports using twisted
pair cabling.
The TP ports support auto negotiation, autopolarity and
autocrossing.
The IP67 switch conforms with protection class IP67 (protection
against shock and foreign particles: dust proof, water protection:
protected against the effects at temporary immersion in water).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP67 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lumberg-Jetter IP67

  • Page 1 0982 EEC 100 Description and operating instructions IP67 ETHERNET-Switch The IP67 Ethernet switch has been especially designed for use in industrial environments. It supports ETHERNET10 MBit/s and Fast ETHERNET 100 MBit/s. The Ethernet switch modules support switched ETHERNET networks in accordance with IEEE standard 802.3 (10BASE-T) or 802.3u (100BASE-TX) using copper technology.

  • Page 2: Safety Instructions

    We would point out that the content of these operating instruc- approved by Lumberg-Jetter. The product can only be operat- tions is not part of, nor is it intended to amend an earlier or exist- ed correctly and safely if it is transported, stored, installed ing agreement, permit or legal relationship.

  • Page 3: General Safety Instructions

    – trained or directed or authorized to switch on and off, to mentioned EU directives at: ground and to label power circuits and devices or systems in Lumberg-Jetter GmbH & Co. KG, 58579 Schalksmühle accordance with current safety engineering standards; Tel. ++49 (0) 23 55 / 83-5 85 –...

  • Page 4: Functional Description

    The switch automatically configures its port for the correct trans- mit and receive pins. Consequently it does not matter whether you connect devices using a cross-over or straight cable. Fig. 2: Overview display elements and interfaces of the IP67 switch 1.3 FURTHER FUNCTIONS AND FEATURES Reset 1.

  • Page 5: Further Support

    In the event of technical queries, please talk to the LNK/ACT LNK/ACT LNK/ACT Lumberg-Jetter contract partner responsible for looking after your account or directly to the Lumberg-Jetter office. You can LNK/ACT LNK/ACT find the addresses of our contract partners LNK/ACT –...

  • Page 6: Technical Data

    Order number 0982 EEC 100 Product designation LJN-EEC-100-SW5 Lumberg-Jetter GmbH & Co. KG Im Gewerbepark 2 Tel. +49 (0) 23 55 - 83-585 58579 Schalksmühle Fax +49 (0) 23 55 - 83-589 GERMANY E-Mail info@lumberg-jetter.com...

Table of Contents