Table of Contents
Summary of Contents for Creator CR-IR3000
- Page 1 CREATOR CORPORATION（CHINA） V1.0 GUANGZHOU CREATOR CORPORATION...
-
Page 2: Safety Precautions
Meanings of Signs ■ Safety Precautions There are signs in both the user manual and the equipments to indicate the hidden risk to your and others’ personal safety and property. These signs are used to help you to operate the equipments safely and correctly, whose meanings are illustrated as bellow. - Page 3 Important Precautions Warning ◆ This product should be well grounded before To ensure the proper function of the equipment and the safety of the user, please using. following the under mentioned instructions during ◆ After the installation and wiring, all the installation, use and maintenance: Installation Instructions sundries should be cleaned up, and the covers...
- Page 4 ◆ The explosion of the electrolytic capacitor: the electrolytic capacitor on the PCB can explode in burning. ◆ Please collect and sort them out by class, and they cannot be disposed into home scrap. ◆ Please dispose them as industrial waste, or according to the local environment protection policies.
- Page 5 All rights related to this manual is reserved by CREATOR Electronics. No organization or person can use part or all of the content of this manual for business usage without permission from CREATOR Electronics.
-
Page 6: Table Of Contents
Menu Chapter One Overview ..........................1 About ............................1 Equipments ..........................1 System Advantages ........................1 Factors that affect the IR radiation ..................... 2 1.4.1 the directivity of receiving and emitting ................2 1.4.2 The relation between the radiating panel and the seats arrangement ......3 1.4.3 The surface of the walls, ceiling, floor and curtain............ - Page 7 Connection between the radiating panel and the controller ............. 15 Control and indication ....................... 15 3.10 Interconnection.......................... 15 3.11 Physical features ........................15 3.12 Electrical features ........................15 Chapter Four Digital IR Receiver ......................16 Overall description ........................16 CR-IR 3002-8/16 Front panel ....................16 CR-IR 3002-8/16 features ......................
-
Page 8: Chapter One Overview
Digital IR radiating controller language is distributed all over the whole CR-IR3000 controller meeting hall and the receiver select the language they need and can hear it with the Digital IR radiating panel earphone. CR-IR3001 IR radiating panel CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 9: Factors That Affect The Ir Radiation
2-6MHZ frequency, and avoided the interference are placed. Please check Fig.1-1. CREATOR radiating panel’s cover area is a from various kinds of lighting sources. ellipse, which means as the distance gets larger, ◆... -
Page 10: The Relation Between The Radiating Panel And The Seats Arrangement
In this situation, the reflected signal can strengthen the signal. In Fig.1-6, this delegate receives only reflected signals, and the signal he gets in this situation is relatively weaker, but sufficient enough. In order to avoid people’s Fig. 1-6 Reflect CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 11: The Surface Of The Walls, Ceiling, Floor And Curtain
The radiating panels’ total radiant intensity is allocated in the controller according to the amount of the carrier wave, and when the used carrier wave increase, the coverage’s percentage will decrease accordingly. 90° installation figure CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 12: Floor Area Of Overlapping And Multi-Path Effects
The receiver machine receive signal from many radiation boards. It may be offset by delay, or can’t receive signal at all. Signal delay can be compensated by radiating panel switch delay compensation. The signal delay reduces the coverage area CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 13: Chapter Two System Controller
Digital IR Language Distribution System User Manual Chapter two System Controller 2.1 Overview 2.3 Installation CR-IR3000 IR radiation host is the main part The system controllers are made of metal of the digital IR distribution system. To transfer and work with many other equipments. -
Page 14: Cr-Ir 3000 Panels Illustration
Back Panel Illustration: ① INPUTS System Power input interface, support Audio channel input, to provide 16 channels AC100V-240V 50Hz/60Hz, self-adaptive. of audio input to be connect to the outer audio signal. ② Ground Line ③ OPTICAL CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 15: Connection
Digital IR Language Distribution System User Manual 2.5 Connection 2.5.1 Connected to CR-M5101 The IR digital language distribution system’s connection is similar to the CREATOR intelligent conference system, here we take CR-M5101 as the sample, and the connection is as follows: ◆... -
Page 16: Electrical Features
Digital IR Language Distribution System User Manual 2.9 Electrical features Power 100-240V Power consumption Carrier wave 2M—6MHz （BAND4） frequency Signal output 2V-VPP Min audio output 20mV-VPP Max audio output 4V-VPP CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 17: Chapter Three Ir Radiating Panel
3W. ◆ Radiating intensity reducing to half value function: reducing the signal power to suite the application in small environment ◆ Adopting arch structure to provide a wide CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 18: Cr-Ir 3001 Front Panel
3.6 “settings of the delay button” If the radiating panels are installed highly enough, the signal intensity of the received IR ④ Power input interface: AC100V~240V signal will not decreased to zero in the shadow CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 19: Wiring Of The Radiating Panel
Fig.3-4 Non-symmetrical connection, should be Fig.3-2 Audience seats and chairman seats avoided coverage If there are IR barricades in the room, extra radiating panels should be added to increase the radiation to ensure the normal transmission of the signal. CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 20: Rectangle Coverage
The LCD can display from 00 to 99, and the digit is timed by 25ns, ie. The delay time can be set is from 25ns to 2475ns (99*25). CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 21: How To Calculate The Delay
◆ Measuring cable length from around the unit of radiation, radiation unit to distribution host to each radiation board L; avoid the phenomenon of high temperature. ◆ Make sure the maximum distance from the CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 22: Connection Between The Radiating Panel And The Controller
About 7KG Exterior Gray Black 3.12 Electrical features Power Supply AC100-240V Transmit power Impedance ： 10kΩ ， Margin ： RF input 100mV－3V Maximum cover distance 76 meters Automatically open the switch threshold 100mV RF signal voltage CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 23: Chapter Four Digital Ir Receiver
5 minutes continuous power switch button for 2 seconds, off. signal unplug headphones will automatically shut down after 5 minutes. ⑥ headphone CREATOR produces two kinds of digital jack (3.5mm), headphone infrared receiver: connection, CR-IR 3002-8 8 channels IR receiver ⑦... -
Page 24: Operations Of The Ir Receiver
80mw instructions to install the polarity of the battery slot. 4.5 Controllers and Indicator ◆ 2 of the LCD indicator to indicate channel number； ◆ On/Off Button； CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 25: Chapter Five Accessories
30Hz – 16KHz Frequency response function with stored receiver. Sensitivity 90dB > 80dB Controllers and indicators Distortion < 0.1dB ◆ On/Off 32 Ω Impedance ◆ Charge state in the receiver direction. Dynamic Range > 85 dB Interconnection CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... -
Page 26: Chapter Six Frequently Seen Malfunction And Maintenance
A: If you use the battery, check battery is sufficient, if installed correctly. B: If you use rechargeable batteries, check whether the charge to saturation. C: Check the headset and the receiver is connected properly. CREATOR CORPORATION (CHINA) 2010-04 WWW.CREATOR1997.COM... - Page 28 CREATOR CORPORATION（CHINA） Copyright by CREATOR Last Revision：04/2010...
Need help?
Do you have a question about the CR-IR3000 and is the answer not in the manual?
Questions and answers