Establishing Bluetooth Connection - Teleste AC6901 User Manual

Introduction
Features

Establishing Bluetooth connection

Leds and button
AC6901 is an adapter for connecting a PC or a tablet/mobile device to AC or
ACE platform amplifiers and nodes using wireless Bluetooth connection. The
AC6901 makes it possible to connect to and configure an amplifier or a node
conveniently within up to 10 m range without using cumbersome cabling
requiring a PC to be placed next to the configured device.
AC6901 contains an internal rechargeable lithium-polymer battery. It should not
be exposed to excessive heat, vibration or mechanical shock.
AC6901 is automatically turned on when it is connected to the USB port of an
ACE family product, and turns automatically off when disconnected from the
USB port. The internal battery is automatically charged while connected.
AC family products do not provide supply voltage to their USB ports, thus
AC6901 uses it internal battery and needs to be turned on and off by pressing
the power button next to the USB connector. First connect AC6901 to the
device, then press the button to turn AC6901 on.
CATVisor Commander 2.9 or later is needed for USB support.
AC6901 should be paired with the PC / tablet / phone using normal Bluetooth
device discovery. The PIN code needed for pairing is 6901.
AC6901 appears as "AC6901-X-YYYYYY" in the Bluetooth device list, with X
indicating AC6901 version and YYYYYY the end of its MAC address.
There are two leds next to the button visible through the transparent enclosure.
Power led (next to USB connector) blinks in red / green during startup and then:
• Green: power on, battery OK
• Yellow: power on, battery charging
• Red: power on, battery voltage low
• Dark: power off
Bluetooth led (next to power button):
• Blinking blue: Searching for Bluetooth connection
• Blue: Bluetooth connection OK
• White/blue flashes: Data transferred over Bluetooth
• Dark: power off
Pressing the power button next to USB connector turns battery power on/off.
First connect AC6901 to host, then press the button. The power button is not
needed when AC6901 is used with ACE family products.
User Manual
59300528
29.10.2014
AC6901
Rev.013
2(16)