Servicing Air Channel - Lindsay Vacu-Maid Owner's Manual

SERVICING Y SERVICING YOUR DIR SERVICING Y SERVICING Y SERVICING Y OUR DIR OUR DIRT CAN WITH AIR CHANNEL OUR DIR OUR DIR
1.
Step 1: Place knee Step 2: Set the dirt can
under bottom dirt on the floor.
canister to support
the weight of the
can, while you un-
latch it.
SOME MODELS WITH SEPARATE
DIRT CANISTER ONLY
6.
Step 6: Lift up the top
lid.
INST INST ALLA ALLA TION OF NEW PLASTIC BA TION OF NEW PLASTIC BAG G G G G TION OF NEW PLASTIC BA
INST INSTALLA INST ALLA ALLATION OF NEW PLASTIC BA TION OF NEW PLASTIC BA
Step 2: Wrap the edges of
Step 1: Place a clean
the plastic bag around the
plastic bag into the
dirt can. edge of the dirt can.
T CAN WITH AIR CHANNEL T CAN WITH AIR CHANNEL T CAN WITH AIR CHANNEL T CAN WITH AIR CHANNEL
2.
Step 3: Remove edge of
the plastic bag from the
bag clip.
7.
Step 7: Clean debris
from top screen as you
would a dryer lint screen
by wiping debris off of
screen and deposit de-
bris into used plastic
bag.
Step 3: Place the portion
of the plastic bag around
the Air Channel under
the bag clip.
3.
Step 4: Lift the plastic bag
from the dirt can.
8.
Step 8: Throw away the
used plastic bag.
Step 4: Use your hands and
press the plastic bag up
against the sides of the dirt
can.
7
4.
Step 5: When plastic bag
is high enough, wrap up
the open end of the bag
for a mess-free dis-
posal.
4 Mill. Plastic Bag
Note: Do not store your replacement Note: Note:
Note: Note:
plastic bags on top of your central
vacuum system. This can cause
severe damage to your central vacuum
system by not allowing the motor to get
cool clean air.
5.
Air Channel
Bag Clip
Step 5: Lift dirt can
back to the bottom
of the dirt canister.
Use your knee to
support the can as
you re-latch it.