Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ICON Wireless Home Alarm
- Page 1 Wireless Home Alarm User Manual V2.1 Copy right© reserved...
-
Page 2: Table Of Contents
1 Accessories ..........................4 2 Introduction ..........................5 2.1 Appearance ......................... 5 2.2 Specifications ........................5 2.3 Usage ........................... 6 2.4 LED Indicators Status ......................6 3 Getting Start ..........................7 3.1 Preparation .......................... 7 3.2 Installing the SIM Card, Battery, and Storage Card ............. 7 3.3 Installation of device ...................... - Page 3 5.15 LED Indicator Setting ....................17 5.16 Power Connect Notification Setting ................ 17 5.17 Power Disconnect Notification Setting ..............17 5.18 Server Setting ......................18 5.19 Server with DNS service Setting ................18 5.20 Real-time Photograph Setting ................. 18 5.21 Check GPRSParameters ................... 18 5.22 Check SET Parameters .....................
-
Page 4: Accessories
1 Accessories Please make sure that all accessories are complete. Pictures are for indication and illustration purposes only. -
Page 5: Introduction
2 Introduction 2.1 Appearance 2.2 Specifications GSM Frequency GSM 850/900/1800/1900MHz GPRS Class 12 Image Resolution 640 X 480 Image Sensor COMS 0.3 Mega Pixels External storage SD card, 2G (Maximum 4G) Battery Capacity 800mAh Working Voltage/Current 5V / 1A Dimension 82.5mm(L)×44.3mm(W)×28.7mm(H) Weight... -
Page 6: Usage
2.3 Usage 2.4 LED Indicators Status Red LED (Power/Working status) Status Implication Quick flashing(interval 0.1s) Low battery Slow flashing(interval 1s) Normal operating Solid red Battery charging Battery power loss/Internal problem Yellow LED（Arm/disarm status） Status Implication Slow flashing(bright 0.1s,dark2s) Delay arming Slow flashing(bright 1s,dark1s) Taking photo or recording video Solid orange... -
Page 7: Getting Start
3 Getting Start 3.1 Preparation Please make sure all accessories are complete when open the package. Please make sure the SIM card installed in device and: a. Works with GPRS network b. Works with MMS function c. Works with SMS function d. - Page 8 Slide the SIM card completely into the slot. To remove the SIM card: Remove the battery if it is installed. Press and hold the lock in the SIM card slot opening with your thumb. Slide the SIM card out from the slot with your other thumb or finger. Note: Make sure there is enough credit on the SIM card.
- Page 9 To remove the battery: Make sure your device is turned off. Remove the back cover. The upper right side of the battery has a notch. Lift the battery by the notch to remove it. Storage Card To install a SD card: ...
-
Page 10: Installation Of Device
3.3 Installation of device Fix the base with the bracket and keep the base rabbet upward. Put the device on the base with the camera lenses facing forward and straightly to ensure that the photos and videos are taken in right direction. Then fix the bracket on the wall or other solid object. -
Page 11: Sms Control
If the device is in disarm status, toggle the ARM switch once to enter delay arming status with the yellow LED indicator flashing. After 1minutes it enters arming status with the yellow LED indicator continually lighting. If the device is in arm status, toggle the ARM switch once to enter disarming status with the yellow LED indicator off. -
Page 12: Infrared Alarm
from disarming status before. 4.3 Infrared Alarm When device in “Armed” status, if motion detected, device would start to pictures and record video, the alarm process as below: a. Take pictures and video, storage in the SD card, user can review all details by connect with PC. -
Page 13: Sms Notification
4.5 SMS Notification If MMS notification is OFF, device would send SMS notification to SOS number with message” Alarm” when the alarm is triggered. 4.6 Dialing Notification When alarm is triggered, device can auto dialing to the SOS numbers, user can monitor the live voice after pick up the call. -
Page 14: Sd Card Failure Alert
is going to shut down because of the voltage of battery is lower than 3.5V 4.10 SD Card Failure Alert Alarm message “Alarm memory card detection failed, please make sure that the memory card is inserted, or the card space is available!” would be sent to SOS numbers if device cannot detect the SD card. -
Page 15: Settings
5. Settings 5.1 Add SOS Number Command Reply SMS Description SOS1:688361 SOS,A,P1,P2,P3# SOS2:688362 (eg)sos,a,688361,688362,688363# SOS3:688363 5.2 Delete SOS Number Command Reply SMS Description Sos,d,1# means delete the (a)SOS,D,1[,2[,3]]# SOS1: first SOS number; (b)SOS,D,P1,P2,P3# SOS2: Sos,d,688361,688362# (ega)sos,d,1,2# SOS3: means delete SOS number (egb)sos,d,688361,688362 # 688361, 688362 5.3 Set APN... -
Page 16: Set Timing Arm
5.6 Set Timing Arm SMS Content Reply SMS Description TIMEON# ON timing alarm Timing fortification status: ON TIMEOFF# OFF timing alarm Timing fortification status: OFF 5.7 Set Time Period of Timing Arm SMS Content Reply SMS Description Status: Off Format of Time period: TIME,S1,S2,S3# Timing fortification status: Off HH:MM-HH:MM;... -
Page 17: Set Alarm Capture
5.12 Set Alarm Capture SMS Content Reply SMS Description ALARMSET,number of Number of pictures: 0-5, picture,video record time# video record time:0-300（s）, Set Success if 0, no photo or no video record; (eg)ALARMSET,3,60# Factory:“ALAEMSET,3,60#”. 5.13 Set Time Interval of IR Alarm SMS Content Reply SMS Description... -
Page 18: Server Setting
5.18 Server Setting SMS Content Reply SMS Description (a)SERVER,1,domain,port,0# (b)SERVER,0,ip,port,0# (ega)SERVER,1,coomix.goomegps.net,9880, Set Success (egb)SERVER,0,183.60.142.140,0# 5.19 Server with DNS service Setting SMS Content Reply SMS Description (a)DSERVER,MODE1,domain,port,protocol0 (b)DSERVER,mode0,IP,port,protocol0# Set Success (ega)DSERVER,1,www.ydpat.com,8011,0# (egb)DSERVER,0,211.154.135.113,8011,0# 5.20 Real-time Photograph Setting SMS Content Reply SMS Description (a)PHOTO# MMS with pictures (b)333... -
Page 19: Check Set Parameters
5.22 Check SET Parameters SMS Content Reply SMS Description Status: OFF SOS1: 123456 SOS2: SOS3: Timing fortification status: OFF Fortification (a)SET# time00:00-23:59,00:00-00:00,00:00 (b)555 -00:00 Device current time:2012-12-18;8:35:52 IMEI: xxxxxxxxxxxxxxx MI number:1544863 MMS alarm:ON Photo resolution:320*240 5.23 Check Base Parameter SMS Content Reply SMS Description Battery status, GPRS... -
Page 20: Reboot
5.26 Reboot SMS Content Reply SMS Description RESET# system reboot after 30 seconds Device would reboot in 30s 5.27 Restore to Factory SMS Content Reply SMS Description Restore to factory setting. Set Success, system reboot after 30 FACTORY# Device would auto reboot in seconds 5.28 Service Platform SMS Content... -
Page 21: Troubleshooting
6.2 Troubleshooting If you are having trouble with your mobile device, try these troubleshooting procedures before contacting a service professional. Common Causes Solution problems Fail to turn on Power off Charge battery The called number is not the SOS Set up SOS number number Fail to monitor...
Need help?
Do you have a question about the Wireless Home Alarm and is the answer not in the manual?
Questions and answers