Should you still have any further This symbol means that P50-3D SOUND complies with Part 15 of the FCC Rules. ID: questions about the products, please contact your local dealer or directly write us an email about WUO-WBT1010 and IC: 7985A-WBT 1010.
Page 3
1. Place on a flat surface This is the most common and simple way to place your P50-3D SOUND. You can place it at the center place of your TV table. When you place it on a flat surface, remember to attach four rubber pads (include as accessory) at the four corners for stability and equalization.
SOUND PERFORMANCE when you buy it home. WIRED CONNECTION Connect ‘SUB OUT’ on the P50-3D SOUND’s rear panel to the ‘LFE IN/SUB IN’ on the subwoofer’s rear panel with a subwoofer cable. No matter you use top-panel control or remote control, follow the...
Next Track: under Bluetooth status press this button to next track. Volume up/down: adjust volume level. Select: press this button and P50-3D SOUND displays ‘SET’. This means your selection is confirmed. Play / Pause: under Bluetooth status press this button to play or pause the music.
Menu Flow Chart +6dB EXIT ANALOG MUSIC +4dB COAXIAL MOVIE BLUETOOTH +2dB CONFIRM OPTIC 2 MENU RESET COAXIAL TREBLE OPTIC 1 SELECT -2dB PREVIOUS RIGHT OPTIC 2 LEARN INPUT -4dB OPTIC 1 NEXT INPUT LEFT -6dB MUTE DOWN MENU UP/DOWN ANALOG SOURCE PAIRED...
TROUBLE SHOOTING Problem Solution Check the P50-3D Sound is plug in and turn on. No sound Check inputs and connections are all right. Re-sync wireless and bluetooth. Check the “Mute” button. Check mode setting. Check subwoofer setting. Check the transmission between Bluetooth device and P50-3D Poor Sound SOUND.