WLD-TEC MonoX ACe LGxxxA1C-B3 Troubleshooting Manual

Warnings:
When using gas, be extremely careful!
Operate the adapter CP 250 on a level surface and in
the showen position (horizontal) , only!
This safety adapter is only to be operated with a
Camping Gaz CP 250 valve gas cartridge. Attempting
to use another cartridge with the safety adapter can
be dangerous. We do not take any responsibility for
incidents resulting from the use of other
manufacturer's cartridges.
Always assemble the CP 250 safety adapter well
away from sources of ignition (e.g. open flames,
cigarettes, pilot lights, electric fires, etc.) and at a safe
distance away from other people.
Make sure that there is sufficient ventilation for correct
combustion and to avoid the formation of dangerous
unburned gas mixtures.
Before every use ensure that the two seals (5&6) of
the adapter are in good condition and in the proper
position. Never use an adapter which is damaged or
impaired in function.
Never refill cartridges.
If there is a leak in the adapter (smell of gas)
immediately bring it to a well ventilated location at a
safe distance from any source of flame in order to
search for and eliminate possible leaks. Never search
for leaks with an open flame. Use soapy water instead.
Failure to follow instructions strictly may results in
gas leaks, which if ignited could cause serious burns
to the user or people nearby.
Never throw away a cartridge which still contains gas.
(shake the cartridge and if you hear the sound of liquid
there is still gas remaining). Read also the instructions
of the gas cartridge.
Storage:
Store cartridges in a dry, cool location; and safe
distance away from sources of heat.
(Ambient temperature below 40°C).
Protect the environment:
Dispose of empty cartridges in a safe place.
Pay attention to the instruction for "technical rules
liquid gas" (TRF)
Additional devices from this product family:
Fuego SCS basic Art.-No.: 8.001.000
laboratory burner with button function
and foot pedal
Fuego SCS Art.-No.: 8.000.000
laboratory burner with button function,
IR-Sensor and LC-Display
Fuego SCS pro Art.-No.: 8.004.000
laboratory burner with button function,
IR-Sensor, LC-Display, 2 rechargeable
batteries
Powerjet 2 Art.-No.: 6.006.000
Hand-held laboratory gas burner
with piezoelectric ignition
Consumption material:
Gas cartridges CP 250 Art-No. 6.000.192
250g butan gas with valve
(Pack = 6 pieces)
O-Ring-sealing, outer (5): Art.-No.: 6.010.820
O-Ring-sealing inner (6): Art.-No.: 6.011.820
WLD - TEC
GmbH
sales department:
Production and Service:
Spandauer Weg 1
Halle-Kasseler Straße 49
D - 37085 Göttingen D - 37318 Arenshausen
Phone : +49 (0)551/793789 Phone : +49 (0)36081/68940
Fax : +49 (0)551/793707
Fax : +49 (0)36081/68942
Internet: http://www.wld-tec.com Email: sales@wld-tec.com
Operating
Instructions
Gas Safety
Adapter
CP 250
EN