Optoma Sign Show 7POP Operation Manual
  1. Manuals
  2. Brands
  3. Optoma Manuals
  4. Digital Signage
  5. Sign Show 7POP
  6. Operation manual
Optoma Sign Show 7POP Operation Manual

Optoma Sign Show 7POP Operation Manual

Digital signage monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Digital Signage Monitor
Thank you for your purchase
Before using this device,
please make sure the
instructions has been read
and understood especially
the "Safety" chapter.
Please keep this manual
in a good condition for
future reference.
Sign Show 7POP
Device number is
very important for
quality management.
Please check the
device number when
you buy this device.
Operation
Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sign Show 7POP and is the answer not in the manual?

Questions and answers

Related Manuals for Optoma Sign Show 7POP

Summary of Contents for Optoma Sign Show 7POP

  • Page 1: Operation Manual

    Digital Signage Monitor Sign Show 7POP Operation Manual Thank you for your purchase Before using this device, Device number is please make sure the very important for instructions has been read quality management. and understood especially Please check the the “Safety” chapter.

  • Page 2: Table Of Contents

    Preface Getting Set-up Install Adjustment Getting Help start Preface Table of contents Step9: Set the replay time ..43 Preface…………………………..2 To replay the contents at the Table of contents......2 same time (timer setting).... 43 Caution for Safety......4 To replay on the due day of every Caution for correct usage ...12 week ...........
  • Page 3 Outlook of the operational manual Outlook of symbols in the manual. Caution: watch out for the operation. Memo: limits of function and usage are written as reference. About the contents of this manual. This is a copyrighted material. Any use of this copy without proper permission is forbidden.

  • Page 4: Caution For Safety

    Preface Getting Set-up Install Adjustment Getting Help start Caution for Safety There are many signs written in the manual or shown in the device. These signs are for the safety of customers, surrounding people and properties. Please pay careful attention to these signs before you read this manual. This signs means: should this sign be ignored or Warning: mistaken, the possible death or injury may take place.
  • Page 5 Warning When abnormality takes place If the following situations occur, please do not use the device because fire or electric shock may take place. • When smoke or strange smell occurs. • When videos or the sounds can’t be played. •...
  • Page 6 Preface Getting Set-up Install Adjustment Getting Help start Caution for Safety (continued) Warning About handling Do not remove the rear cover or remodel the device If the supply voltage inside is high, fire or electric shock may break out. Please return the device to stores for inner part examination and repair.
  • Page 7 About power cord Do not use the power cord with devices other than Sign Show 7POP Do not use the power cord with devices other than Sign Show 7POP, because it may cause fire or electric shock. Do not damage the electric cord Do not damage the power cord, because it may cause fire or electric shock.
  • Page 8 Preface Getting Set-up Install Adjustment Getting Help start Caution for Safety (continued) Caution! About power cord, power plug and AC adapter Please use the exclusive AC adapter, or fire or electric shock may break out. Please disconnect all links with machines and then connect the power plug, or fire or electric shock may break out.
  • Page 9 About handling Do not put the device in the following places because it may cause fire or electric shock. • The place with dust or wetness • The place with smoke or heated air , such as close to humidifying or cooking place. •...
  • Page 10 Preface Getting Set-up Install Adjustment Getting Help start Caution for Safety (continued) Caution! About moving Do not move this device when there are objects onto If the objects fall down, people may get hurt. When moving the device, please unplug the power or connecting cord.
  • Page 11 About falling-proofing In order to prevent falling, please take the following measures People may get hurt because of falling caused by earthquake. Please make use of the stand hole at back side and fix the device to the wall or pillar firmly. Make sure to choose the firm place.

  • Page 12: Caution For Correct Usage

    Preface Getting Set-up Install Adjustment Getting Help start Caution for correct usage Places for safekeeping or use of About installing device Please install the device close to the outlet Please do not put the device at Please install the device close to the following places the outlet so that it is easier to plug Because it may cause...
  • Page 13 The accessory’s AC adapter can situation because it may cause not be used for the device other falling of eyesight. than SIGN SHOW 7POP. Please turn off the power when Do not put heavy object over inserting the memory card.

  • Page 14: Terminology

    Preface Getting Set-up Install Adjustment Getting Help start Terminology <Front View> Speakers The sound can be played from SD memory card Power light/ timer light The light will be on for the following situation: Power on Green light Timer set on for Orange light operation <Base View with cover removed>...
  • Page 15 Attention light To light up the rear piece of the device. The battery cover Remove battery cover at the following situation: To alter the set-up by button To change the batteries Button To set up the menu, it is used moving the cursor up to see page 25) To show the picture again, it is used to make it brighter.

  • Page 16: The Process Of Using The Device.16

    Preface Getting Set-up Install Adjustment Getting Help start The process of using the device Please prepare the accessories and tools Step 1 you need --------------------------------------------------- page 17 Please insert the SD memory card into the Step 2 device ----------------------------------------------------- page 18 Please connect the AC adapter with the device - page 19 Step 3 Please format the SD memory card----------------- page 20...

  • Page 17: Step 1: Accessories And Tools

    Getting start Step 1: Accessories and tools Accessories included with the device Necessaries for Must read it Quick Start Guide Quick Start Guide * 1 AC Adapter and power cord * 1 Necessaries for installing sticker of “replay from start” Simple stand*1 screws packaged sticker of “replay...

  • Page 18: Step 2: Insert The Sd Memory Car

    Preface Getting Set-up Install Adjustment Getting Help start Step 2: Insert the SD memory card • Please insert the SD memory card into the device • Please make sure to unplug the power before insert the SD memory ( page) Memo: Take off the rear cover: remove •...

  • Page 19: Step 3: Connect Device With Ac Adapter

    Step 3: Connect device with AC adapter • When connecting device with AC adapter, the power will be on • When plugging the DC plug into the DC terminals, please turn the DC plug sideways as the following picture. Please insert into AC outlet DC terminal DC plug...

  • Page 20: Step 4: Format The Sd Memory Card

    Preface Getting Set-up Install Adjustment Getting Help start Step 4: Format the SD memory card Before using your SD card for the first time, a format may be required. To show the menu screen Notice: Turn on the power, and then press the •...
  • Page 21 Format the SD memory card (continued) To display the capacity of To practice the formatting memory Select the “yes” by up or down button, Select “memory capacity” by up or and then press the set button. ⇒ Start to format the SD memory card. down button, and then press the set button.
  • Page 22 Preface Getting Set-up Install Adjustment Getting Help start Return to the menu screen Memo: Please select “ return” after completing • When taking out the SD memory formatting and then press the set card, please make sure to turn off button.

  • Page 23: Step 5: To Update The Configure File And Content Files

    Step 5: To update the configure file and content files To transmit the content file that is saved in USB memory to SD memory card. <To speculate the transmitting time from USB memory> Set button Content files Transmitted time 10 MB About 10 seconds 50 MB About 50 seconds...
  • Page 24 Preface Getting Set-up Install Adjustment Getting Help start To turn on the power Please make sure that the power light is green or orange color. Power light To insert the USB memory into the USB terminal Please take off the base cover of terminal, and insert the USB memory into USB terminal.
  • Page 25 The message will show “A replayed, the content files can still be CONFIGURATION FILE IS FOUND!” replaced. • If the replaying time has been set Use the same steps as you would in updating content files to update the beforehand for the transmitted configuration files.

  • Page 26: Before The Set-Up

    Preface Getting Set-up Install Adjustment Getting Help start Before the set-up Set-up Buttons used for set-up The outlook of selecting item Please use the 4 buttons inside the To select the menu cover of rear operation button. The selected item displays in the word of white color.

  • Page 27: To Make Sure The Setting Content Of All Content Files

    To make sure the setting content of all content files Make sure the setting content of replaying day or time of content files and then write the contents in the following table. Timer set-up Schedule set-up Timer set-up (Set [mode] as “loop replay” (Set [timer set-up] as “on”) Replaying Finishing...
  • Page 28 Preface Getting Set-up Install Adjustment Getting Help start Setting screen of OSD Setting contents Setting value (default) System Assure the The model, operation time, firmware version system can be assured * setting can't be practiced Memory Make sure the space of SD memory card, capacity capacity, range, or to initialize the SD card Renew...

  • Page 29: Setting Contents And Items

    Setting contents and items Mode Loop The replayable content ( to be set loop replay, Schedule replay [replay] at replaying selection)can schedule replay setting be repeatedly replayed at the to see setting time of [timer setting] page 42) Schedule The replayable content ( to be set replay [replay] at replaying selection) can be replayed at the setting...
  • Page 30 Preface Getting Set-up Install Adjustment Getting Help start Setting screen Setting contents Setting value (default) Schedule Setting the Starting Setting the replay time hour: 00~23 setting replay time time minute: 00~59 of content second: 00~59 Finishing Setting the finishing time files( to time select the...

  • Page 31: Constitution Of Setting Screen

    Constitution of setting screen System setting screen Date/time setting screen of d t /ti Network setting screen Auto download screen (Network Mode: Active) Menu screen Web page setting screen (Network Mode: Passive) Timer setting screen Schedule setting screen LED On/Off setting screen Others setting screen Exit...

  • Page 32: Step 6: Set Up The Network And Online Access

    Preface Getting Set-up Install Adjustment Getting Help start Step 6: Set up the network and online access • Set up the network • Set up the web page • Set up the auto download Buttons used in network settings To display the menu screen Please press the left and right button simultaneously for 2 seconds.
  • Page 33 To set the network mode Select “Network Mode” and press the set button. ⇒ The selected item turns from white to blue. Press the left or right button to toggle “Active” or “Passive”. • Selecting “Active” will allow you to use the “Auto Download”...
  • Page 34 Preface Getting Set-up Install Adjustment Getting Help start To set the web page To set the auto download Web page settings become available if “Passive” Network Mode is Auto download settings become selected in Network settings. available if “Active” Network Mode is Select “Web page”...

  • Page 35: To Access The Device Via A Web Page

    Set up the network and online access (continued) To access the device via a web page Connect your PC and networks to your device to use this function. and transfer the file to the device To set up the system menu using a USB drive.
  • Page 36 Preface Getting Set-up Install Adjustment Getting Help start To set up the play menu To set the other menu Play menu allows you to view your Other menu allows you to enable or schedule edit, take snap shot of your disable time setting, LED, return contents, and upload files to the switch, and login authentication.
  • Page 37 To set up the network menu To view the system log Network menu allows you to set up System log allows you to view your network settings. information on OSD, Play, System, and Other. Select the “Network” tab on top to view the network menu.

  • Page 38: To Upload Contents Using Auto Download

    Preface Getting Set-up Install Adjustment Getting Help start Set up the network and online access (continued) To upload contents using auto download Connect your PC and networks to your device to use this function. An ftp site must be set up first before using this function. Auto download settings become available if “Active”...

  • Page 39: Step 7: Set The Present Time And Date

    Step 7: Set the present time and date • Set the present time and day • Must set the present time and day before setting replaying time • Button for setting Button for setting To display the menu screen Please press the left and right button simultaneously for 2 seconds.
  • Page 40 Preface Getting Set-up Install Adjustment Getting Help start To set the date (year/month/ day) To set the time ( hour: minute: Select the item by using the left or right second) button, and then press the set button. Select the item by left or right button ⇒...

  • Page 41: Step 8: Select The Replaying Contents (Set To Replay Contents)41

    Step 8: Select the replaying contents (set to replay contents) To replay or not to replay the saved contents in SD memory card Memo: • At original setting, it is set up as “replay.” Button for setting Example To replay contents: Program 1, Program 2, Program 3 Up button [Schedule setting screen]...
  • Page 42 Preface Getting Set-up Install Adjustment Getting Help start To display the menu Please press the left and right button simultaneously for 2 seconds. Select the “ don’t replay” by using up or down button, and then press set button. ⇒ Replaying selection displays in the word of white color.

  • Page 43: Step9: Set The Replay Time

    Step9: Set the replay time To replay the contents at the same time (timer setting) To replay the contents which are set to replay at “contents replaying setting”. Program 5 Buttons for setting Selecting replay Program 1: replay Program 2: replay “replay”: replayed Program 3: not contents...
  • Page 44 Preface Getting Set-up Install Adjustment Getting Help start To display the menu screen To set timer setting “on” Please press the left and right button Make sure the selected setting values simultaneously for 2 seconds. of [timer setting] and then press the set button.
  • Page 45 Set the replay time (continued) To replay the contents at the same time (Timer setting) (continued) To set the starting time( hour: To set finishing time ( hour: minute: second) minute: second) Make sure that the setting value of Make sure that the starting time [timer setting] displays in the word of displays in the word of white color and white color and then press down...
  • Page 46 Preface Getting Set-up Install Adjustment Getting Help start To set “ Saturday” as stopping To set “ loop replay” [mode] Select [schedule setting] and then Make sure that the finishing time press the set button. ⇒ Schedule setting screen displays. displays in the word of white color and then press down button.

  • Page 47: To Replay On The Due Day Of Every Week

    Set the replay time (continued) To replay on the due day of every week Set up the replaying day and time of content files. Example Replay the Program 1 from 11:30AM~1:00PM every Monday and Friday. [Schedule setting screen] Replaying selection Setting item Example Content files...
  • Page 48 Preface Getting Set-up Install Adjustment Getting Help start To display the menu screen To display the content replay Please press the left and right button setting screen simultaneously for 2 seconds. Select to content file (Program 1) which is set to replay by using down button and then press the set button.
  • Page 49 Set the replay time (continued) To replay on the due day of every week Change the setting value by using the To set [repetition setting] as up or down button and then press set “ every week” button. Make sure that the setting value of ⇒...
  • Page 50 Preface Getting Set-up Install Adjustment Getting Help start To set up [replay due day] To complete the content replay Make sure that the finishing time setting displays in the word of white color and Press the down button and select the press the set button.

  • Page 51: To Replay On The Due Day Of Every Month

    Set the replay time (continued) To replay on the due day of every month Example Replay the Program 5 from 10:00AM~5:30PM on 5th and 25th of every month. [Schedule setting screen] Setting item Example content files replaying selection mode Loop replay (forced) Content Program 1 files(content files...
  • Page 52 Preface Getting Set-up Install Adjustment Getting Help start To display the menu screen To display the content replay Please press the left and right button setting screen simultaneously for 2 seconds. Select to replay content file (Program 5) by down button and then press the set button.
  • Page 53 Set the replay time (continued) To replay on the due day of every month (continued) To set [repetition setting] as To set “Starting time” ( hour: “ every month” minute: second) Make sure that the setting value of Make sure that the setting value of [volume] displays in the word of white [repetition setting] displays in the word color and then press down button.
  • Page 54 Preface Getting Set-up Install Adjustment Getting Help start To display “*” symbol or not by using To set finishing time ( hour: up or down button and then press the minute: second) set button. Make sure that the starting time (In example, 5th and 25th displays “*”) displays in the word of white color and ⇒...

  • Page 55: To Replay On The Due Period

    Set the replay time (continued) To replay on the due period To replay the content at the same due period. Example Replay the Program 1 Program 2 Program 3 Program 4 by order from 10:00AM~8:30PM during 2008/3/1~2008/3/14. [Schedule setting screen] [Content replay setting screen] Setting item Example...
  • Page 56 Preface Getting Set-up Install Adjustment Getting Help start To display the menu screen To display the content replay Please press the left and right button setting screen for Program 1 simultaneously for 2 seconds. Select content file (Program 1) which has been set replayed by down button and then press the set button.
  • Page 57 Set the replay time (continued) To replay on the predetermined period Change the setting value by using the To set [Repeat setting] as “ off” up or down button and then press set Make sure that the setting value of button.
  • Page 58 Preface Getting Set-up Install Adjustment Getting Help start Change the setting value by using the To set up [Starting up or down button and then press set day](year/month/day) button. Make sure that the finishing time ⇒ Setting value displays in the word of displays in the word of white color and white color.

  • Page 59: Install

    Step 10: To install the device onto the site Install To install the simple stand To install the device Screw M3 screws (accessory) into the installing hole of the device as Please install the device on the flat site following picture. by using the simple stand and foot packaged together with the device.

  • Page 60: To Paste The Sticker Of " Replay From Start" To The Device

    Preface Getting Set-up Install Adjustment Getting Help start To paste the sticker of “ replay from start” to the device Please paste the sticker of “replay from start” to the device as the following picture. sticker of “replay from start” button Memo: •...

  • Page 61: To Adjust The Brightness And Volume

    To adjust the brightness and volume To adjust the brightness and volume, please use the 4 buttons inside the rear battery cell cover. Adjustment The button for adjustment of brightness and volume Up button darken brighten Down button Right button Left button <state of taking off the battery cell Set button...

  • Page 62: To Adjust The Volume

    Preface Getting Set-up Install Adjustment Getting Help start To adjust the volume About adjusting the volume, please go to the section of schedule setting ( page 40). However, the volume can be changed during contents replaying by using left or right button. To louder the volume Press the left button and the volume louder.

  • Page 63: To Use The Button Of "Replay From Start

    To use the button of “replay from start” Once pressing the button of “replay from start” during contents replaying, the content files will be replayed from start. Please paste the sticker of “replay from start” for button to the device. ( page 60) “replay from start”...

  • Page 64: To Turn On/ Off The Power By Manual

    Preface Getting Set-up Install Adjustment Getting Help start To turn on/ off the power by manual The power can be turn on/ off by manual without setting replay time. It can be used to replay the contents without timer setting or to turn off the power by force during replaying.

  • Page 65: To Edit The Content Files

    To edit the content files • With the accessory’s CD-R (General Layout Editor), the animation or static state of contents can be edited and the captions can also be set up. • With this CD-R, the setting of replay schedule can be simply operated. page 38) Memo: •...

  • Page 66: To Change Batteries For Clock Button

    Preface Getting Set-up Install Adjustment Getting Help start To change batteries for clock button For changing the batteries of buttons ( call “button” for the following mention) as clock delays. Please change the new batteries. Memo: To turn off the power of device •...

  • Page 67: Packaging

    Packaging When carrying the device, please pack it as the following picture.

  • Page 68: Getting Help

    Exclusively for SIGN Please format the card in the memory card in SHOW 7POP computer. However, the data in SD SIGN SHOW 7POP format,the files can’t memory card will be erased. can not be read in be read in the computers.
  • Page 69 • Device: memory card player offer local or other warranty’s. • Type: SIGN SHOW 7POP Your can take your device for • Purchase day: maintenance to selling stores or the supporting units which are •...

  • Page 70: Network Port

    Preface Getting Set-up Install Adjustment Getting Help start Specifaction Network port Interface 10/100M Ethernet LCD panel type-7 TFT color LCD network connector, RJ45. Valid range 154.08*86.58 *Notice: It does not Screen 800*RGB*400 pixel support Wake-on-LAN. constitution Contrast: 500:1 Power (AC adapter) View angle: left/right 65 degree, up 40 Voltage/...
  • Page 71 Battery The battery for timer (CR2032) is attached with device * The specification and outlook may be changed without announcement. Accessory AC adapter Power code Quick Start Guide Sticker for button of “replay from start” Stand & Screw CD-R(UM & Driver) WIRE SADDLES Appearance and size Unit: mm...

Table of Contents