Status; Events; Phone - Onq HMS 950 Owner's Manual

Press the temperature zone you wish to control, then press #.
Press the ' 0 ' key to select all HMS Thermostats. This is a simple way to broadcast the new Heat or Cool setting or change the
system mode, fan mode, or hold mode of all HMS thermostats in your system.
When an HMS Communicating Thermostat is entered:
"THERMOSTAT 1 - THERMOSTAT 1 - TEMPERATURE IS (TEMP)."
"PLEASE CHOOSE:
1: MODE
2: HEAT SETTING
3: COOL SETTING
4: FAN
5: HOLD

#: STATUS

*: CANCEL
- If the # (STATUS) key is selected, HMS 950 will read the current status of the thermostat. For instance:
"TEMPERATURE IS (80), HEAT SETTING IS (60), COOL SETTING IS (75),
MODE IS (COOL), FAN IS (AUTO), HOLD IS (OFF)."
6 - Status
Press 6 from the MAIN MENU to get to the STATUS menu.
From the Status menu, HMS 950 will report the Security Mode (for the current Area).
If all zones are secure and there are no troubles with the system, HMS 950 reports "System OK".
If any zones are currently not ready, in trouble, or bypassed, HMS 950 will report the current status of those zones. Any system
troubles are also reported.
Finally, HMS 950 will report the current Outdoor Temperature (if part of the system) and the current time and date.

7 - Events

Press 7 from the MAIN MENU to get to the EVENT menu.
The HMS 950 will read the 3 latest events. Press the ' 7 ' key for HMS 950 to read 3 more events, or ' * ' to cancel.

8 - Phone

This command allows you to record and verify the address. If an optional HMS Two-Way Audio Module is being used, this
command also allows paging and listening to the premises.
Press 8 from the MAIN MENU to get to the PHONE menu.
"PHONE - PLEASE CHOOSE: [3 INTERIOR]
8 PLAY ADDRESS, 9 RECORD ADDRESS *: CANCEL."
To play the current address, press the 8 key.
To record the address, press the 9 key and enter the Master code.
"RECORD ADDRESS - [BEEP]
At the [BEEP], record your name and address.
Page 34