Toshiba 26AV52R Owner's Manual page 64

Integrated high definition lcd television
Hide thumbs Also See for 26AV52R:
Table of Contents

Advertisement

Congratulations on the purchase of your new Toshiba High-Definition Television. You must get HD Signal to get an HD Picture!
Getting HDTV is as easy as 1,2 or 3.
There are 3 basic ways to receive an HDTV Signal on your new High-Definition T'I.
Over-The- Air (Antenna)
2
CABLE
3
SATELLITE
Connect a high quality outside
antenna (not supplied) directly
to the antenna input on the TV
(Reception cannot be guaranteed
and is based on proximity to
local signal)
~
Cable Customers will need to
subscribe to High-Definition
Digital Cable from your local
provider. (Additional monthly
subscription cost may apply)
Satellite Customers will need a
High-Definition satellite receiver
and appropriate dish hardware.
(Additional monthly subscription
cost may apply)
Additional HDTV Antenna Reference Information can be obtained from
www.antennaweb.org
Digital Cable or Digital Satellite is not HDTY. The picture quality is superior to standard analog cable, but it is not HDTV! See the difference HD
Programming makes!
4
Component Video Input
ColorStream® HD Component may also be used to
receive HDTV
Use if no HDMI™ or DVI Jack is available.
There are
3
jacks color-coded with Red-Green-Blue on
the back ofthe TV and HD Cable Box or HD Satellite
Receiver.
This connection will require a separate analog audio
connection. (use the red and white audio connections)
DVI to HDMr"
Your HD Cable Box or HD Satellite Receiver may have
a DVI connection. This will be connected to the HDMr
M
jack on the TV using an HDMI™ cable and an HDMr
M
to
DVI converter.
DVI carries digital video only. Therefore, this will require
a separate analog audio connection as well. (use the red
and white audio connections)
3
HDMITM is the best connection for
HDTV
This is a digital connection that
carries both digital video and
digital audio.
To connect directly from an
antenna or basic cable.
Connect the cable directly
to the antenna input on the
back of the TV
I
Antenna Input
Once you have a High-Definition Signal you need to connect it to a High-Definition Input on your TV.
If you are connecting directly from an antenna or basic cable.
l
If Yi
U
are using an HD Cable Box or HD Satellite Box, there are 3 standard connections that can be used to receive an HD signal.
2
HDMr" to HDMr"
Y
Ps
PR
INPUT
TV
OUTPUT
Cable box I Satellite box
AUDIO
R
L
Y
PSPR
~ ~ ~
INPUT
TV
HLlml
AUDIO
OUTPUT
Cable box I Satellite box
DVI
R AUDIO L
eommm-m
(iI«i
INPUT
TV
HLlml
OUTPUT
Cable box I Satellite box
HLlml
INPUT
TV
Now that you have HD Programming and are connected to an HD Input, Tune to an HD Channel (Remember not all channels are currently broadcast in HD) Sit back, relax and enjoy the superior quality of High-Definition.
Note: Standard analog TV channels and HD channels, even on the same network, broadcast on different channels. Example: ABC analog may be on channel 4, while ABC-HD may be on channel 104.
If you are experiencing problems please call Toshiba Customer Service at 1-800-63 1-381 I
All cables and Adapters are sold separately.
For additional Toshiba Product Information visit www.tacp.com. Please remember to complete your product registration. Failure to register your product does not disminish your warranty rights.
TOSHIBA
Leading Innovation
»>

Advertisement

Table of Contents
loading

This manual is also suitable for:

37av502r32av52r37av52r26av502r32av502r

Table of Contents