Wireless Access Point Quick Guide v1.0 Article: CNP-WFAP Package Contents CANYON CNP-WFAP Main Unit Standing Base Power Adapter Quick Guide Documentation CD Warranty Card Hardware Overview Getting Started Connecting to Device Begin by searching for an appropriate location to setup device.
Page 2
Connect PC(s) with LAN ports (PC1/PC2/PC3/PC4) of the device by CAT 5 Ethernet cables. 1 PC connects to 1 port using 1 cable only. Power on the cable or DSL modem. Plug in power adapter. The Power status indicator at front panel of device will light up as soon as power adapter is connected properly.
Page 3
Wireless AP Configuration Select a Radio Band type from the drop down box. (802.11b/g is recommended) Select Radio Mode from the drop down box. (AP+WDS is recommended) Type in SSID as desired. (SSID must be identical in all devices connecting to device) Select a broadcasting channel from drop down box.
Need help?
Do you have a question about the CNP-WFAP and is the answer not in the manual?
Questions and answers