Table of Contents
Advertisement
Batteries and Charger
CHARGING THE BATTERIES
Be sure to follow the procedures below accordingly.
1. Turn the scooter key switch to "OFF".
2. Open the charging socket cap on the scooter's front tiller then connect the
charger's plug to the charging socket (Figure 7).
3. Plug the power cable into your power outlet.
4. Turn on the switch to the charger.
5. The charger's red light will be on at the beginning of a charge. The charging
duration is at least 6-8 hours, but can last up to 10 hours, based on the status of the
batteries and temperature.
6. The charger light will turn to green when the charging is complete.
7. Turn off the charger, disconnect the power cord and remove the plug from the
charge socket.
Figure 7
14-
-
Advertisement
Table of Contents
