Mitsubishi Electric Mr.Slim PLA-RP35BA Service Manual page 40

11-1-3. How to perform the up/down operation using wired remote controller (PAR-30MAA / PAR-31MAA)
1
Select "Maintenance" from the Main menu, and press the
Select "Auto descending panel" with the F1 or F2 button, and press the
button.
* When using the auto descending panel, always set the "Address" and "Unit
No." with "Service" – "Function setting".
2
Move the cursor to "Ref. address", "Unit No." or "Operation" with the F1
button to select.
Select the refrigerant address and the unit number for the units to whose falls
panel, with the F2 or F3 button, and press the
• Ref. address: Refrigerant address
• Unit No.: 1, 2, 3, 4, All
• Operation: Down / Up
Press the F4 button to confirm the unit.
<Confirmation of target unit>
If the unit being set is unknown, make the setting and then press the F4 but-
ton to confi rm.
The air conditioner which is blowing downward is the target air conditioner.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ...............
OCH412F
button.
button.
button
button
40
Maintenance menu
Auto descending panel
Manual vane angle
Main menu:
Cursor
Auto descending panel
Ref. address
Unit No. All
Operation Down / Up
Keep clear, panel descending.
Press Check for Unit No.
Input display:
Cur. Address Check
Auto descending panel
Ref. address
Unit No.
All
Operation Down / Up
Panel will stop in 30 sec.
Keep clear, panel descending.
Cur. Address Check