1. Manuals
  2. Brands
  3. BOB Manuals
  4. Car Seat
  5. Duallie Infant Car Seat
  6. Instructions manual

BOB Duallie Infant Car Seat Adapter Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Congratulations on
your purchase of the
BOB Duallie Infant Car
Seat Adapter (ICSA). It
is designed to allow the
attachment of an Infant Car
Seat to your BOB Duallie
Stroller. Please refer to the
tables at right for details
of compatible strollers and
car seats.
This product is compatible
with strollers that have a serial
number within the range
listed. Using this product on
strollers with incompatible
serial numbers may lead
to injury or death.
Sharp Screw 2x
Loctite 262
Restraint Belt M
Arm
TAKE TIME - READ AND UNDERSTAND INSTRUCTIONS COMPLETELY!
Before attempting to assemble or use your new Duallie ICSA, read and understand these assembly
instructions completely, as well as the warnings at the end of this document, to insure proper
assembly and safe operation.
If you are unclear on any point, contact your dealer or BOB before use.
OMA18B
Duallie Infant Car Seat
Adapter Instructions
Car Seat Compatibility
Brand
Model
Companion ™
®
Snug Ride
Graco
®
Snug Ride
®
Graco
Snug Ride
Graco
®
Snug Ride
Graco
®
Safe Seat ™
®
Primo Viaggio™
Peg Perego
®
Primo Viaggio SIP™
Peg Perego
®
Primo Viaggio SIP™ 30/30 2007 and newer
BOB
®
Model
®
Duallie
Ironman
®
Duallie
Revolution
®
Duallie
Revolution Duallie 12"
Stroller Strides
®
Duallie
Bonnet Spacer 2x
Pivot Screw 2x
Pivot Plug 2x
Bonnet Screw 2x
Pivot Nut 2x
Restraint Belt F
Accessory Bar
Main Bar
Year (s)
2003-2008
®
2003 and newer
®
30
2010 and newer
®
32
2008 and newer
®
35
2009 and newer
2006 and newer
2003 and newer
2006 and newer
Stroller Compatibility
Serial Number Range
AD000001 - AD999999
AE000001 - AE999999
AH000001 - AH999999
AL000001 - AL999999
AM000001 - AM999999
Arm
Left Tray
Right Tray
TOOLS NEEDED:
To perform the
installation, you need a
Phillips screwdriver, 4mm
hex (Allen) wrench, an
8mm socket wrench and
a rag or paper towel.
P1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Duallie Infant Car Seat Adapter and is the answer not in the manual?

Questions and answers

Related Manuals for BOB Duallie Infant Car Seat Adapter

Summary of Contents for BOB Duallie Infant Car Seat Adapter

  • Page 1 Before attempting to assemble or use your new Duallie ICSA, read and understand these assembly instructions completely, as well as the warnings at the end of this document, to insure proper assembly and safe operation. If you are unclear on any point, contact your dealer or BOB before use. OMA18B...
  • Page 2 INSTALL CANOPY SPACER SET PARKING BRAKE. See the “Parking Brake” section of your stroller owner’s manual. COLLAPSE HANDLE BAR REMOVE EXISTING BONNET SCREW Squeeze red handles and fold handle bar forward. Use an 8mm socket wrench on Turn socket wrench counter- clockwise.
  • Page 3 ATTACH MAIN BAR POSITION ARMS PREPARE TO ASSEMBLE Rest ICSA assembly on stroller seat. Rotate arms into an upright position. Place pivot screws and pivot plugs on stroller seat next to ICSA INSERT PIVOT SCREW Insert a pivot screw through end of main bar and into pivot plug...
  • Page 4 ATTACH RESTRAINT BELT AND ARMS LOCATE FABRIC SCREW REMOVE FABRIC SCREW Extend canopy to expose lower fabric screw. Remove screw with Phillips screwdriver, exposing fabric grommet and rivet nut. Repeat on other side. POSITION ARM (TRAY SIDE) SECURE ARM Insert sharp screw through end of arm, Position arm between fabric grommet and into rivet nut.
  • Page 5 INSERT SHARP SCREW TIGHTEN SHARP SCREW Tighten fi rmly with Hold strap at a 90 Phillips screwdriver. degree angle. 90° Note: Insert sharp screw through arm, fabric If screw does not turn easily, unscrew and start again. grommet and into rivet nut. ATTACH RESTRAINT BELT F PREPARE ASSEMBLY REMOVE EXISTING FABRIC SCREW...

  • Page 6: Install Infant Car Seat

    PREPARE STROLLER FOR INFANT CAR SEAT INSTALLATION POSITION CANOPY SET PARKING UNBUCKLE BRAKE RESTRAINT BELT Position both canopies Unbuckle restraint against handle bar. See the “Parking Brake” belt. Place ends section of your stroller outside seat. owner’s manual. INSTALL INFANT CAR SEAT When installing car seat in the Duallie ICSA for the fi rst time, Warning test fi t with the car seat unoccupied to ensure you understand...
  • Page 7 DOUBLE CHECK CAR SEAT IS TIGHTEN RESTRAINT BELT SECURELY ATTACHED Pull on red ring to tighten. Pull car seat upward without removing restraint belt. You should not be able to remove car seat without Warning unfastening restraint belt. Warning Be sure restraint belt tension is not constricting child as it Failure to securely attach car seat may cause serious injury.
  • Page 8 DOUBLE CHECK CAR SEAT IS TIGHTEN RESTRAINT BELT SECURELY ATTACHED Pull on red ring to tighten. Pull car seat upward without removing restraint belt. You should not be able to remove car seat without unfastening restraint belt. Warning Warning Be sure restraint belt tension is not Failure to securely attach car seat constricting child as it...
  • Page 9 ENGAGE CAR SEAT FASTEN RESTRAINT BELT Fasten restraint belt over top of Slide grooves on underside of car seat onto ICSA main bar. infant car seat as shown. ® Red hook on Graco should be under main bar. TIGHTEN RESTRAINT BELT DOUBLE CHECK CAR SEAT IS SECURELY ATTACHED Pull on red ring to tighten.
  • Page 10 RIGHT TRAY INSTALLATION REMOVE ACCESSORY BAR Warning Children should not be placed directly in the BOB Stroller seat with the Duallie ICSA installed, Using a Phillips screwdriver unless tray is installed remove both screws. directly in front of child for TIP: Attach screws to safety and protection.
  • Page 11 REMOVE RESTRAINT BELT REPLACE ORIGINAL SCREW REMOVE RESTRAINT BELT F Insert original screw Retrieve original screw and through hole and nut. place on stroller seat. Tighten fi rmly. Keeping your fi nger on the nut, remove restraint belt screw with Phillips screwdriver.
  • Page 12 Do not ingest. Use in well ventilated area. Keep out of reach of children and dispose of vial properly. Other safety warnings for Loctite 262 can be found at www.loctite.com BOB IS NOT RESPONSIBLE FOR INJURY, DAMAGE OR FAILURE THAT RESULTS FROM OWNERS FAULTY ASSEMBLY OR MAINTENANCE AFTER SHIPPING. OMA18B...

  • Page 13: Limited Warranty

    LIMITED WARRANTY BOB Trailers Inc. takes pride in its workmanship and strives to manufacture the best products possible. Therefore, we warranty the Duallie ICSA against defects in material and workmanship subject to the conditions listed below. Since no product is indestructible, it does not cover defects attributable to or resulting from normal wear, abuse or alteration.

Table of Contents