Advertisement
Installation requirements...
Tools and Parts:
Assemble the required tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
Tools needed:
This section does not include new installations in solid
surface countertops. See "Countertop Requirements" section.
• drill
• 3/8" drill bit
• jigsaw
• file
• tape measure
• pencil
• long-handled Philips screwdriver
• long-handled flat blade screwdriver
• silicone sealant*
*Silicone caulk/sealant must meet the qualifications of
ASTM C920, FDA regulation no. 21, CFR 177.2600, NSF-51,
Dow Corning
786 is recommended.
®
Parts and materials needed:
• faucet with check valve and accompanying plumbing
supplies as needed
• strainer basket
Parts supplied:
• sink
• sink template
• sink mounting hardware (clamps)
• Installation Instructions/Use and Care Guide
Plumbing requirements
Sink should be plumbed to local plumbing codes.
All plumbing connections should be made by licensed,
qualified plumbers.
Countertop requirements
The thickness of the countertop must not be more than 1-1/2"
(38 mm) thick at the sink rim.
Solid surface countertop installations must be performed by a
qualified fabricator/installer with appropriate tools.
2
Advertisement
