VIETA VH-MS260WH User Manual page 31

Clock/timer setting erased
- Power has been interrupted or the power cord has
been disconnected.
- Reset the clock/timer.
Unit does not work
- This unit contains a microcomputer for signal
processing and control functions. In very rare
situations, severe interference, noise from an
external source, or static electricity may cause it
to lock. In the unlikely event that this should
happen, unplug the power cord from the wall outlet,
wait at least 5 seconds and then plug it back in
again.
Weak incoming call signal on iPhone
- When playing music on the iPhone though the
docking station, the reception mode may be poor,
resulting in the iPhone not receiving a strong enough
incoming call signal.
30
DVD Microsystem