1. Turn down the volume of the DVD player.
2. Plug in the headphones.
3. Turn down the volume of the
headphones.
4. Turn on the headphones.
Note:
When headphones are connected to the
Audiovox PVS69701, the speakers of the
unit will be automatically disabled.
Inserting and changing the battery
1. Open the battery door
2. Insert a AAA battery.
Note:
If the headphones are not going to be used for
a long time, remove the battery to avoid
corrosion damage caused by battery leakage.
WARNING: Do not dispose of batteries in a
fire, batteries may explode or leak.
Speaker:
Impedance:
Sensitivity
Frequency Response:
Frequency Range of Active Noise Reduction:
Power Handling:
Power Requirement:
Battery Life:
Weight:
noise cancelling headphone.pmd
Using the Headphones
1
SPECIFICATIONS
40mm Cobalt Magnet
32 Ohm ± 10%
100 dB ± 3 dB @ 1 Khz
20Hz - 20kHz
70 - 1000 Hz ( ±12dB at 300 Hz)
100 mW
1 x AAA battery
up to 60 hours (Alkaline battery)
Approx. 180g (without battery)
2
2
Caution:
Listening to audio at an excessive
volume can permanently damage
your hearing.
1
2
810-P69795-100
Printed in China
3/23/2006, 4:05 PM
4
3