Tenda 3G622R+ User Manual page 105

3G 11N Wireless Router
2. Forget the login password and can not enter
the setting page. What can I do?
Press the "RESET" button for 7 seconds to restore the
Router to default settings.
3. The computer connected with the Router shows
IP address conflict. What can I do?
Check if there are other DHCP servers in the LAN. If
there have, disable them.
The default IP address of the Router is 192.168.0.1 and
please maker sure the address is not occupied by other
devices. If there are two computers with the same IP
addresses, please modify one.
4. I can not use E-mail and access the Internet.
What can I do?
It happens in ADSL connection and Dynamic IP users.
And you need modify the default MTU value (1492).
Please in the "WAN Setting" modify the MTU value with
the recommended value as 1450 or 1400.
5. How can I configure and access the Internet via
Dynamic IP?
In Setup Wizard of the Web utility interface, select
"Dynamic IP" connection type and click "Save" to
activate it. As some ISPs bind the user computer's MAC
address, you need to clone the Router's WAN MAC
99