Sony Cyber-Shot DSC-WX10 Instruction Manual page 20

ISO
White Balance
White Balance
Shift
Focus
Metering Mode
Burst Shooting
Interval
Bracket Setting
Scene Recognition
Soft Skin Effect
Smile Shutter
Smile Detection
Sensitivity
Face Detection
Color Mode
Color Saturation
Contrast
Sharpness
Anti Blink
Movie SteadyShot
In-Camera Guide
Viewing
Slideshow
3D Viewing
Send by
GB
20 TransferJet
Adjust the luminous sensitivity.
Adjust color tones of an image.
Adjust color tones according to the adjusted value set
based on the selected White Balance tone.
Select the focus method.
Select the metering mode that sets which part of the
subject to measure to determine the exposure.
Select the number of images taken per second for Burst
shooting.
Set the type of the bracket shooting.
Set to automatically detect shooting conditions.
Set the Soft Skin Effect and the effect level.
Set to the camera automatically release the shutter when
a smile is detected.
Set the Smile Shutter function sensitivity for detecting
smiles.
Select to detect faces and adjust various settings
automatically.
Select the vividness of the image, accompanied by
effects.
Adjust the vividness of the image.
Adjust the contrast of the image.
Adjust the sharpness of the image.
Set to automatically shoot two images and select image
in which the eyes are not blinking.
Set the strength of SteadyShot in Movie Mode.
Search the camera's functions according to your needs.
Select a method of continuous playback.
Set to play back images shot in 3D mode on a 3D TV.
Transfer data by closely aligning two products equipped
with TransferJet.