260/441-9603 • 866/286-8046 • 260/441-8264 FAX: www.tippmannindustrial.com INTERNET: CONGRATULATIONS on your purchase of the Tippmann "BOSS" hand stitcher sewing machine WARNING READ THROUGH THIS MANUAL THOROUGHLY AND BECOME FAMILIAR WITH THE TIPPMANN “BOSS” PARTS, OPERATION, AND SAFETY PRECAUTIONS BEFORE YOU ATTEMPT TO OPERATE THIS MACHINE.
The Tippmann "BOSS" hand stitcher sewing machine is a needle-feed, lock- • To Check* the Presser Foot Lift: stitch machine. The "BOSS" is designed and built to achieve precision quality stitching, extreme durability of the machine itself and maximum owner (*Always be sure the presser foot path satisfaction for many years.
INSTALLING THE NEEDLE INSTALLING BOBBIN IN BOBBIN SHUTTLE • Lower the needle foot by pulling the stitch handle until the • Locate the bobbin shuttle in the end needle set screw of the cylinder bed. Press the shuttle is visible. release latch to release the bobbin cylinder (point A).
THREADING THE MACHINE THREADING THE NEEDLE Place selected thread on thread stand. Lead thread through all Thread • Pass the thread down through needle Guide threading points as shown. foot then thread through the needle eye from left to right as shown in illustration. Secondary •...
DRAWING BOBBIN THREAD UP THROUGH NEEDLE PLATE PRESSER FOOT ADJUSTMENT The Presser Foot Adjustor adjusts the Presser Foot Pressure. A properly adjusted Presser Foot will Presser advance the material without slipping. Foot STEP 3: Drawing up the bobbin thread. To determine the proper pressure for Adjustor •...
THREAD SPECIFICATIONS ADJUSTING THE STITCH A PERFECTLY LOCKED STITCH NEEDLE THREAD Recommended Thread and Needles for Tippmann Boss results with upper and lower tensions balanced so that needle Thread ROUND POINT CHISEL POINT and bobbin threads are drawn into Size 7 x 3 Needle ....
• If your thread is not frayed off of the spool, you may need to make a minor TO ADJUST THE RACK STOP (AR-100-4), DO THE FOLLOWING: adjustment on your machine. You will want to call Tippmann’s toll free service 1. Remove back cover line and speak to a technician.
Page 10
• Replace front cover (AR-30) and 4 front cover bolts (SM-160-3). • Replace handle (HS-31) and the handle bolt (100-3). • Replace back cover (HS-16) and reassembly is complete. Call Tippmann’s Toll Free service line 866-286-8046 for further assistance if needed.
TIPPMANN CLEANING AND LUBRICATING THE MACHINE Your Tippmann "BOSS" should always be kept clean from lint and INDUSTRIAL PRODUCTS, INC. dust buildup to insure proper operation. Periodically check the external and internal components of the machine to remove any WARRANTY AND REPAIR POLICY buildups which may have occurred.
ADDITIONAL TIPPMANN PRODUCTS & ACCESSORIES ADDITIONAL TIPPMANN PRODUCTS & ACCESSORIES Prices Effective January 1, 2003. Prices shown with cash discount. All prices subject to change. The Tippmann “EMBOSSER” SM 16-1 SM 16-2 SM 16-3 NYLON SAMPLE KIT SM 16-4 THE TIPPMANN...
Page 13
TIPPMANN CLICKER ACCESSORIES CLK - 69 CL7-STAND HEAVY DUTY TABLE With Raised Work Surface CASTERS CL - 34 You can turn your 7 TON CLICKER SLIDE DECK Tippmann Clicker The slide deck allows you to Press into a mobile slide the entire cutting deck...
Page 14
INSIDE BACK COVER EMBOSSING ROLL DIES Choose from a wide selection of patterns to fit your taste. EM-48 1 1/4” EAGLE EM-46 1” MAPLE LEAF EM-47 1” HORSE HEAD EM-45 1 1/4” OAK LEAF EM-40A 3/4” BASKET WEAVE EM-44 1 1/4” MORNING GLORY EM-40B 1 1/4”...