Subscribe to Our Youtube Channel
Related Manuals for Elements eStat TH232-AF-230
Summary of Contents for Elements eStat TH232-AF-230
-
Page 1: Installation Manual
eStat Installation Manual Before you begin installing read through these instructions carefully and check that you have all the www.electricunderfloorheating.co.uk components required. -
Page 2: Installation Instructions
TH232-AF-230 Installation Instructions 230 V Base Parts Connect the wires: • Power: • One (1) thermostat Terminals 1 & 5 • One (1) floor sensor • Load: • One (1) wall plate Terminals 2 & 4 see note 1 Guidelines •... -
Page 3: Operating Instructions
TH232-AF-230 Operating Instructions Programmable Thermostat LO The actual temperature is below 0 °C (32 °F). Description HI The actual temperature is above 70 °C (158 °F). Er The thermostat built-in sensor is defective. Replace the This thermostat provides the following temperature control modes: thermostat. -
Page 4: Clock And Day Setting
NOTE: Early Start can be used in Automatic mode only. When this Icon Intended use A/AF modes F mode function is set to On, the thermostat calculates the optimal time to start heating in order to obtain the desired temperature by the set Comfort 21 °C (70 °F) 28 °C (82 °F) -
Page 5: Technical Assistance
Customizing the schedule Warranty You can program the thermostat to use either 2 or 4 periods Aube warrants this product, excluding battery, to be free from defects each day. For example, you can use 4 periods on weekdays and 2 in the workmanship or materials, under normal use and service, for a periods on weekends.
Need help?
Do you have a question about the eStat TH232-AF-230 and is the answer not in the manual?
Questions and answers