Summary of Contents for TigerStop Barcode scanner
- Page 4 2 0 1 3...
-
Page 5: Barcode Scanner
•Power Supply with power cable Installation and Setup 1. Prior to shipping, the barcode scanner cable is installed onto the barcode scanner hand unit. Remove this from the box. 2. Remove the null modem cable from the box and plug one end into the open plug on the barcode scanner cable. - Page 6 Once installed, use the sample barcodes below to test the barcode scanner functionality. •Clear the deck of the TigerStop - Ensure nothing is in the path of the machine. •TigerStop will move as soon as the code is scanned. The barcode scanner will beep on a success- ful read.
- Page 7 Note: See the TigerStop manual for details on list programing. 2. Scan the barcode of the length you want to put into the list. Once scanned, TigerStop will automat- ically continue to Line 2. Continue scanning lengths in this manner until you have all the lengths you want in the list.
- Page 8 Setting the Scanner Baud Rate The barcode scanner baud rate is set at the factory. If a change in baud rate is necessary, the bar- code scanner will need to be reprogrammed. Follow the instructions below to program the barcode scanner.
- Page 9 2.Scan the code to the left and wait for 3 seconds. 3. Choose ONE of the baud rate barcodes below. 4.Scan the following 6 barcodes, waiting 3 sec- onds between each one. 5.When finished, cycle power on the barcode scanner. 6.Scan the test barcodes to test the barcode scanner functionality.
- Page 12 FIND US ONLINE AT www.tigerstop.com 12909 NE 95th Street Vancouver, WA 98682-2426 1.360.254.0661 sales@tigerstop.com TigerStop B.V. Holland 31 546 575 171 info@tigerstop.nl...
Need help?
Do you have a question about the Barcode scanner and is the answer not in the manual?
Questions and answers