Table of Contents
Advertisement
Do not continue to run the unit when there is something wrong or there is a strange smell.
The power supply needs to be shut 'off' to stop the unit; otherwise this may cause an electrical shock or
fire.
Be cautious when unpacking and installing the product.
Sharp edges could cause injury. Especially watch the edges and the fins on the heat exchanger of the
product.
Always check for gas (refrigerant) leakage after installation or repair of product.
Low refrigerant levels may cause failure of the product.
Keep level even when installing the product.
This to avoid vibration or water leakage.
Do not put your fingers or others into the fan, or evaporator.
The ventilator runs at high speed, this could cause serious injury.
Luxury Air Source Heat Pump‐Monobloc System
10
Advertisement
Table of Contents
