Belkin UNIVERSAL WIRELESS KEYBOARD WITH iPad SHORTCUT KEYS User Manual page 3

Available languages

To start, charge your keyboard by connecting the USB cable to an

appropriate USB power source (e.g. laptop, USB wall charger, etc.) and

the micro-USB to your keyboard.

When the battery is fully charged, the Status amber LED turns OFF.

Then pair it with your tablet or smartphone. The Status LED light will flash

blue while the keyboard is not paired.

To initiate pairing between the keyboard and tablet or smartphone, ensure

they are in close proximity:

For iPad:

Go to the Home screen on your iPad and tap on

"Settings > General > Bluetooth."

Turn Bluetooth® to "On."

Turn on the keyboard and press and hold the "Pair" key.

The Status LED will flash blue on the keyboard and the keyboard

will show up under "Devices" on the tablet. Select "Belkin Bluetooth

Keyboard." NOTE: When pairing and charging simultaneously, the

amber charging light will remain on while the blue pairing light flashes.

A code will appear on the iPad screen. Use the keyboard to enter this

code followed by the "Enter" key.

If, after 60 seconds, pairing fails, you will have to repeat the steps

above. You can view the status from the screen of the iPad.

Note: For other Bluetooth devices, follow device's Bluetooth pairing

instructions.

After creating a paired link, you do not need to repeat the pairing

process; the keyboard automatically links to the tablet or smartphone

when both devices are switched on. Pairing must be performed every

time you want to use the keyboard with a different tablet or smartphone.

Note that when the power switch is OFF and you plug the USB cable to

charge the keyboard, it'll attempt to pair the device.

The keyboard is designed to prolong battery life and will enter into

battery-saving mode under prolonged inactivity. To wake the keyboard,

press any button. The Status LED will flash blue while the connection

is being reestablished, and will be solid blue for two seconds when the

connection is successfully established. The Status LED then turns off

during ongoing operation.