Charging; Starter Motor - Eton America Matrix R4-150 Service Manual

E-ton matrix r4-150 (pn2i) scooter service manual
Table of Contents

Advertisement

11.4 CHARGING

Connect the charger's positive cable to the battery position
terminal.
Connect the charger's negative cable to the battery
negative terminal.
Using a trickle charger, apply 0.9A-charging current for
about 5 hours. (Normal charging - Recommended)
Or using 4A-charging current, charge for about 1 hour.
(Quick charging)
Keep flames and sparks away from a battery being
charged. Quick charging should be limited to an
emergency; Normal charging is preferred.

11.5 STARTER MOTOR

The starter motor is located on the engine.
Unscrew the two starter motor fixing bolts and remove the starter motor.
Disconnect the motor wire.
Connect motor and battery to check whether the starter motor is functioning.
(Section 7.7)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn2i

Table of Contents