Pentax 645 Z Manual Reference page 14

Menu
15. AF.S Setting
16. 1st Frame Action in AF.C
17. Action in AF.C Continuous
E3
18. Hold AF Status
19. AF with Remote Control
20. Color Space
21. LCD Panel Illumination
22. Save Rotation Info
23. Save Menu Location
24. AF Fine Adjustment
E4 25. Flash Sync Speed
26. 4-way Controller Options
27. Mirror Up Operation
28. Shake Reduction Options
29. Enable/Disable Controls
E5
Reset Custom Functions
R12
Item
Sets the action priority for when the focus mode is set to x and the
shutter release button is fully pressed.
Sets the action priority for the first frame when the focus mode is set to
y and the shutter release button is fully pressed.
Sets the action priority during continuous shooting when the focus
mode is set to y.
Sets whether to maintain the focus for a certain amount of time when
the subject happens to move out of the selected focusing area after
being focused.
Sets whether to use autofocus when shooting with a remote control
unit.
Sets the color space to use.
Sets the brightness of the LCD panel.
Sets whether to save rotation information when shooting.
The last menu tab displayed on the monitor is saved, and it is displayed
again the next time F is pressed.
Allows you to precisely fine tune your lenses with the camera's
autofocus system.
Selects the flash sync speed.
Selects the ABCD operations for when the focusing area selection
mode is set to one of the "Select" type modes.
Enables or disables the Mirror Up dial.
Select whether to perform Shake Reduction only when shooting or
when the shutter release button is pressed halfway.
Enables or disables operation of the selected group of buttons and
dials using 7.
Resets all the settings of the Custom Setting menu to the defaults.
Function Default Setting Page
Focus-priority p.R40
Release-priority p.R41
Focus-priority p.R41
Off p.R41
Off p.R41
sRGB p.R41
Low p.R41
On p.R41
Reset Menu
p.R41
Location
Off p.R42
1/125 p.R42
Type1 p.R42
On p.R42
Type1 p.R43
Type1 p.R43
– p.R43