BETTER MOTION GROUP Chair-Mounted Stepper User Manual

Chair-mounted stepper

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

P44 Stepper

User Manual

Table of Contents

Need help?

Do you have a question about the Chair-Mounted Stepper and is the answer not in the manual?

Questions and answers

Summary of Contents for BETTER MOTION GROUP Chair-Mounted Stepper

Page 1 P44 Stepper User Manual...
Page 2: Table Of Contents
Time, work, power, and the resistance setting are not only displayed on the LCD, but this Technical Data data is stored and can be wirelessly transferred via bluetooth® to a PC for analysis. P44 Preventative Maintenance more accurately charts patient progress electronically.
Page 3: Attaching To Chair
P44 in a straight line. Avoid pull- enough by result in P44 pushing it ing P44- the pole can slip out and becoming free into the hole it is harder to manoeuvre. of chair legs. until you meet resistance.
Page 4: Getting On
Getting On Setting Resistance (models without LCD) Approach P44 attached to a chair The resistance is controlled by the from either side and lift one leg two knobs below the information CAUTION up and over to the other side. sticker. The left knob controls re-...
Page 5: Lcd Operation
Remove the black plastic plug from the hole located on the bridge. Slide the aluminum bracket rod side down, with the foam pads touching the P44, into the hole as far as it will go. left key centre key right key...
Page 6 Press any of the three keys to turn Turn the left hand knob clockwise the LCD on and the following half a turn to increase the resis- WELCOME TO P44 message will appear. Press any tance and then extend your left key again to set the resistance.
Page 7 LCD Operation: Workout Information LCD Operation: Data Transfer Coming Soon... Once the workout begins, the LCD continuously scrolls between L WORK 23.5 CAL time, power, and work. Press any of the three buttons to advance R WORK 20.5 CAL through the screens manually. To stop the workout at any time, press all three buttons at the same CAUTION...
Page 8: Removing Battery (Models With Lcd)
Removing Battery (models with LCD) Charging Battery (models with LCD) Place P44 carefully on its back- When the battery is low, a warn- side. Remove the red and black ing will flash on the LCD. CAUTION Battery Low leads from the terminals. Crossing the leads or plac-...
Page 9: Technical Data
Technical Data Scheduled Maintenance: Replacing Brake Pads Length 26 in / 66 cm Release all tension (turn resistance knobs counter-clockwise) and place P44 on its backside. Width 17 in / 43 cm Height 27 in / 68.5 cm Unit Weight 25 lbs / 13.5 kg...
Page 10 Once both calipers have been worked on, centre the rod and replace the pin to secure it in place. Re-install the battery and place the P44 back right-side...
Page 11: Troubleshooting
Strain gauge has Contact customer ment malfunction- backwards. sure foam pads are malfunctioned. service. ing. touching P44. Cannot stop work All three buttons not Depress all three Strap is tangled. Untangle strap. out. depressed at once. buttons at once.
Page 12: Location Of Serial Number
Better Motion Group can be contacted directly at: sories not originally intended or compatible with the P44 Pro as sold. Phone: 1.877.”P”44.9044 There are no other warranties or guarantees expressed or implied by Better Motion Group.

This manual is also suitable for:

P44