Connecting Your Dct6200 To A Standard Definition Stereo Tv And Mono Vcr - Seaside Communications DCT 6200 HD User Manual

CONNECTING YOUR DCT6200 TO A STANDARD DEFINITION STEREO TV AND MONO VCR

For the connections described below you will need the following cables:
1
Connect an RF coaxial cable to the cable wall outlet and the
2
Connect an RF coaxial cable to the
connector on the VCR, as shown below.
3
Connect a video cable to the
the VCR:
RF Coaxial Cable
4
Connect an RF coaxial cable to the
on the stereo TV:
This video connection method doesn't support high definition video. For more information, see
"Connecting your DCT6200 to an HDTV" on page 9.
After you have finished connecting your DCT6200, see "Setting Up Your New DCT6200 for Digital Cable
Services" on page 22.
RF (75 ohm)
(3: one supplied;
two extra)
/
TO TV VCR connector on the DCT6200 and the
VIDEO OUT connector on the DCT6200 and the
TO
TV/VCR
CABLE
IN
Mono VCR
INPUT
VIDEO
CABLE/ VIDEO S-VIDEO
ANTENNA IN
TO TV
connector on the VCR and the
Mono VCR
TO TV
RF Coaxial Cable
17
a`qSOMM rëÉê dìáÇÉ
Video
CABLE IN
connector on the DCT6200.
VIDEO
OUT
AUDIO IN SPDIF IN
R L
AUDIO OUT
Y Pb r
Video Cable
CABLE
Stereo TV
CABLE/
ANTENNA IN
/
CABLE ANTENNA IN
INPUT VIDEO connector on
/
ANTENNA IN
connector