Advertisement
Simply plug the Standard USB end into the "OUT" port of the
battery. This is important, DO NOT try and force it in if it's not
working. You're probably trying the wrong port. Now, use the
other end of the cable and plug it into the device you wish to
charge. Next, press the Power button once to start charging
your device. Once 100% charged, simply unplug your device
and store your Jarv TANK power bank until you're ready to
charge again.
Checking the status of the Jarv TANK Power Pack
You can check the amount of juice your power bank has by
pressing the Power button. There are 4 total LEDs. When the
button is pressed the LEDs will illuminate for several seconds.
Four LEDs means that the power pack is fully charged and one
LED means that it's almost empty.
To keep your power pack operating to its fullest potential,
make sure to do the following:
1. Do not wash the juice pack with harsh chemicals, soaps or
detergents. Just wipe the case with a soft, water-dampened
cloth. Wipe the pins gently with a soft, dry cloth.
Advertisement
