Secur SP-2000 Operating Instructions

DIGITAL SOLAR RADIO &
LED FLASHLIGHT
Model SP-2000
General Description: This multi-function emergency radio includes a built-in solar panel and digital
display – never needs batteries. Features AM/FM and alarm. Can be charged via built-in dynamo,
built-in solar panel or external USB connection. Charges cell phones and other digital devices.

Product Features and Functions:

• Digital display AM/FM radio
• Built-in dynamo and solar panel – never needs batteries
• 3 LED flashlight
• Can also be charged via USB plug, optional DC cigarette
lighter plug or optional AC home adaptor
• Digital alarm clock
• Can charge cell phones and other digital devices
• Headphone jack
• External antennae
• Can also be charged via external Secur Solar Panel (optional)

Operating Instructions:

Charging the Battery Using the Hand Crank: Unlock
the handle and crank clockwise at about 3 revolutions per
second for 1 minute or more. Continue cranking for additional
charging as needed. The red charging light will glow when
charging.

Charging the Battery Using the Built-in Solar Panel:

Place the radio in direct sunlight with the solar panel facing
directly into the sun. The red charging light will glow when
charging.

Charging the Battery with External USB Power Source:

Using the male USB cable included with the radio, plug the
small round pin into the DC port on the side of the radio.
Plug the large male USB plug into your USB power supply
– Computer, DC car adaptor, AC adaptor or external solar
panel. The red charging light will glow while charging
Using the Radio: First, make sure that the ON/OFF switch on the bottom of the radio is in the ON
position. Turn on the radio using the volume control knob on the left side of the radio. Select AM or FM
on the Band button on the top of the radio. Select stations using the Tuning knob on the right side of
the radio. Fully extend the antenna for best reception.
Backlighting for Radio Display: Press the Light button on the top of the radio to light the station
tuning back lighting. This will stay on for 10 seconds and then shot off automatically.
Setting the Local Time: Press and hold the "Time Set" button. At the same time, press either the
"Hour" or "Minute" button to set the local time. Release the buttons and your time is set.
Secur Products
www.securproducts.com
A Division of Maverick Industries
07.2013
94 Mayfield Avenue
Edison, NJ 08837