iXchange UA-03xB User Manual

Retractable Bluetooth Headset
UA-03xB User Guide
Overview of UA 03xB..........................
Product Specification.........................
Introduction........................................
Charging the Headset......................
Turning Your Headset On and Off.....
Pairing Your Headset / Pairing Procedure
Reconnecting Your Headset.............
Headset Features................................
Safety Precautions.............................
Maintenance.......................................
Overview of UA 03xB:
Product Specification:
Bluetooth V2.1 and with backward compatible V2.0,
Version V1.2 and V1.1
Bluetooth Profile Headset and Hands-free Profiles
Supported
Dimensions 54mm(L) x 26mm(W) x 15mm(H)
Weight 19g
Charging Time Around 1.5 - 2 hours
Talk Time Up to 7 hours
Standby Time Up to 240 hours
Product Range 10 meters with no obstructions
Operation 0-50℃
Temperature
Battery Type and Rechargeable Li-Polymer 100mAh
Capacity
Introduction:
Thank you for choosing the patented Retractable headset, UA-03xB
supports Bluetooth V2.1, which increase voice quality and product range,
also reduce power consumption.
Inside the package we should find:
1x Retractable Headset
1x Charger
1x User guide
1x Inear cushion (L and S size)
The headset is designed
to clip on your clothing.
The earpiece length can
be extended by gently
pulling on the cord. The
length can be retracted
(shortened) by pressing
the circular winding button
near the top of the device.
P.1
P.2
P.3
P.4
P.5
P.5-7
P.7
P.8-12
Patented Mechanism
P.13-14
QD ID No.: B015326
P.14-15
1
2
3
Charging the Headset:
Before using the headset, please insert the charger into the power source
and connect the other end to USB charging socket of headset to charge the
battery fully.
To extend the battery life, re-charging the battery every 6 months. Charging
indication will be delayed in a few seconds if the headset has not been used
for a long period of time.
Status Status Indicator
1. Charging Red LED
2. Low battery Red LED for every five
seconds
Turning Your Headset On and Off:
A. Turning On the Headset
Press and hold the MFB until the LED flashes blue.
B. Turning Off the Headset
Press and hold the MFB until the LED flashes red.
Pairing Your Headset / Pairing Procedure:
The headset must be paired with the mobile phone (or other Bluetooth-
enable device) before use.
A. With a Bluetooth mobile phone
1. Turn on the Bluetooth function in the mobile phone.
2. Place the headset and the phone where they are visible, within arm's
length from each other.
3. Ensure the headset is OFF.
4. Press and hold the MFB until the headset LED flashes blue and red
alternately, the headset is now at the pairing mode.
5. Search the headset by choosing the search function in the phone and
select "UA-03XB".
6. Enter "0000" if you are prompted to enter the passcode and press
"OK". If yours supports Bluetooth v2.1, no code is required due to
"Simple pairing" function.
7. When pairing is complete, the LED will flash blue and follows by
beeps. A headset icon appears on the screen.
8. For some phones, you may need to manual press "connect" to
connect the headset
9. If the pairing is not complete within about 2 minutes, the headset will
automatically go to standby mode and will turn off after 5 minutes. Do
steps 2 through 7 repeatedly until succeed.
B. With two mobile phones (Multipoint)
Retractable Bluetooth headset supports a Multipoint function that allows
simultaneous pairing with two phones.
1. Pair with the first phone (according to the pairing procedure part A).
2. Turn off the headset and the first paired phone is then disconnected
automatically.
Pairing Your Headset / Pairing Procedure (cont.):
3. Pair with the second phone (according to the pairing procedure part
A). The LED flashes blue once the second phone is paired
4. Again, for some phones, you may need to manual press "connect" to
connect the headset.
5. Go back to reconnect the first paired phone manually, press "connect"
in the phone Bluetooth menu.
Reconnecting Your Headset:
1. If the headset has powered off, the headset will be reconnected to the
phone automatically after switching on the headset, if not, press MFB
once to reconnect.
2. If the phone has powered off and headset is then disconnected you
need to press MFB once to reconnect when phone turns on again.
Otherwise, the headset will switch off.
Audio
A short beep
every 20
seconds
4
5
6
7