Table of Contents
Advertisement
Quick Links
We appreciate your purchase of a TAKEX flame sensor.
Please read this instruction manual carefully for correct and effective use.
This sensor is designed to detect flames and to initiate an alarm, it is not a fire-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning), abuse,
misuse, abnormal usage, faulty installation or improper maintenance.
This sensor detects Ultraviolet rays in the flames and initiates an alarm.
It does not detect smoke, heat.
PRODUCT DESCRIPTION
Flame sensor FS-2000E is designed to detect ultraviolet rays contained in flames, and to initiate an alarm.
In addition to alarm sound, FS-2000E is equipped with form C (N/C, N/O.) output, to meet professional application.
Also, memory LED enables you to find out the initiated sensor out of a series of sensors.
Area adjustment mechanism brings wide selection of protection angle.
Quick separation of sensor and base eases installation and maintenance.
1
PARTS DESCRIPTION
1-1
Description
Wire lead
(For exposed wiring)
Sensor head
Detection window
(Sensor built-in)
Memory LED (yellow)
Blinks for 3min. after
alarm then Light on for
47 min.
1-2
Accessory
Tapping screw
Sensor locking screw
( 4×25) × 2 pcs
Knockout for exposed wiring
Buzzer (Built-in)
Alarm sound : Sounds intermittently during
offdelay 10sec.
Instruction manual
( 3×6) × 1 pc
× 1 copy
FLAME SENSOR
FS-2000E
Terminals
Wiring hole
BASE UNIT
Front mark
Lock window
SENSOR UNIT
Alarm LED (Red)
Blinks during
offdelay 10sec.
1-3
Mode setting
Locking screw hole
Release lever
Wiring hole
Area locking screw
Mode selector
Mode selector
1 2 3 4 5
Alarm Sound
Detection timer
Alarm Memory
Detection Sensitivity
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Takex FS-2000E
-
Page 1: Product Description
This sensor is designed to detect flames and to initiate an alarm, it is not a fire-preventing device. TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance. -
Page 2: Product Classification
Do not handle in a rough manner. detector. Intense flames such like gas explosion's may damage the TAKEX is not responsible for damage, injury or losses by fire, sensor, instead of the detection. accident, calamity, Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance. -
Page 3: Terminal Arrangement
WIRING Terminal arrangement Power Alarm output Tamper 10 to 30VDC Dry contact relay output Form C Dry contact output Form B N.C.) (non-polarity) Action : Offdelay (detection time + 2 sec.) Action : Open when sensor unit is detached Stand-by : 25mA Capacity : 30V (AC/ 0.3A or less Capacity : 30V (AC/... -
Page 4: Operation And Function
(4) Tighten the screws. OPERATION AND FUNCTION (1) Operation (2) Mode setting FS-2000E is equipped with 4 functions which can be used Alarm (Basic action) according to the application or environment. This product alarms only by detecting the flame continuing Mode setting will be done by mode selector (dip switch) in for the set time of detection timer. -
Page 5: Detection Area
/ siren.) TROUBLESHOOTING Solve possible problems according to the following table . If normal operations can not be restored by these corrective actios, contact either the dealer from whom you bought the unit or TAKEX. Trouble Check Corrective action... -
Page 6: Specifications
Limited Warranty : TAKEX products are warranted to be free from defects in material and workmanship for 12 months from original date of shipment. Our warranty does not cover damage or failure caused by natural disasters, abuse, misuse, abnormal usage, faulty installation, improper maintenance or any repairs other than those provided by TAKEX.
Need help?
Do you have a question about the FS-2000E and is the answer not in the manual?
Questions and answers