Table of Contents
Advertisement
Remove: to remove the selected music from the playlist.
Remove all: to remove all music from the playlist.
Settings:
1) List auto generation: Two statuses ON and OFF are available.
When the status is ON, press the option soft key in the play list,
it will provide the newly add, remove and remove all functions
in addition to the play, detail, add to ring tone pool and setting
functions.
Note: When the automatic play list generation is set at OFF,
you may not play newly added MP3 music. Thus, it is
recommended that you set it at ON.
2) Repeat: You can choose out of close, single and all.
3) Shuffle: You can choose the ON/OFF status of the random
playing.
4) Background play: If it is set at ON, the music playing will
continue after the music play interface exits (the music playing
will stop in the case of an incoming call). At the same time. If
you set it at OFF, music playing will automatically stop after the
music play interface exits.
5) BT stereo output:
music (note: a Bluetooth headset must connect with your
phone).
6) BT stereo headset: this function can choose Bluetooth which you
connect.
7) Spectrum display: You can choose to display the spectrum of
the song.
5.4.6 Sound Recorder
Three recording formats are supported: WAV, AMR and AWB. Users
41
Advertisement
Table of Contents
