Pittasoft Blackvue LCD Manual page 30

Power Settings
Item
The minimum operating voltage can be set. In park-
ing recording mode, once the vehicle battery voltage
Min. Working Volt
reaches under the setting value, the power supply will
stop automatically to prevent battery from drainage.
Battery save mode time can be set. In order to prevent
Battery Save Mode
the vehicle battery from drainage, power supply auto-
matically stops after a set period of time.
Note
y It is necessary to use Power Magic (the Battery Discharge Prevention
Device) to configure the power settings.
30
Description
SD Card Formatting
The microSD card can be formatted or a format cycle message can be set. If a format
cycle message is set, a message will appear in the cycle when this product is turned
on.