Specification; Electrical Specification - LG Flatron M228WD Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to 22" Wide Monitor TV used
LD73D chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Power Voltage : Standard input voltage (100~240V@,
50/60Hz)
*Standard Voltage of each products is marked by models.
(2) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(3) The receiver must be operated for about 20 minutes prior
to the adjustment.

4. Electrical Specification

4-1. General Specification (TV)
No Item
1 Video input applicable system
2 Receivable Broadcasting System
3 RF Input Channel
4 Input Voltage
5 Market
6 Picture Size
7 Tuning System
8 Operating Environment
9 Storage Environment
10 Display
Copyright 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes

SPECIFICATION

3. Test method
Specification
PAL-D/K, B/G, I, SECAM
PAL/SECAM BG
PAL/SECAM DK
PAL I/II
SECAM L/L'
DVB-T
VHF : E2 ~ E12
UHF : E21 ~ E69
CATV : S1 ~ S20
HYPER : S21~ S47
100 ~ 240V/50Hz, 60Hz
EU
22 inch
FVS 100 program
° °
Temp : 10 C ~ 35 C
Humidity : 20% ~ 80%
° °
Temp : -10 C ~ 60 C
Humidity : 5% ~ 90%
LCD Module
- 7 -
3.1 Performance : LGE test method followed
3.2 Demanded other specification
Safety : CE, IEC Specification
EMC : CE, IEC
EU(PAL Market)
PAL
PAL, 200 PR.(Option)
Non condensing
Non condensing
LPL
Remark
LGE Internal Use Only