ITRON IPC-E200N Quick Start Manual
  1. Manuals
  2. Brands
  3. ITRON Manuals
  4. IP Camera
  5. IPC-E200N
  6. Quick start manual
ITRON IPC-E200N Quick Start Manual

ITRON IPC-E200N Quick Start Manual

Hd panorama network camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

HD Panorama Network Camera Quick Start Guide
Version 1.0.0
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPC-E200N and is the answer not in the manual?

Questions and answers

Summary of Contents for ITRON IPC-E200N

  • Page 1 HD Panorama Network Camera Quick Start Guide Version 1.0.0...
  • Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! 1．Electrical safety All installation and operation here should conform to your local electrical safety codes.
  • Page 3 5．Environment This series network camera should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. Please keep it away from the electromagnetic radiation object and environment. Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.

  • Page 4: Table Of Contents

    Table of Contents Structure ....................1 Multi-function Combination Cable ..........1 Dimensions ................... 1 Bidirectional Talk ................2 1.3.1 Device-end to PC-end ............. 3 Installation ....................4 General Installation ............... 4 Device Installation Steps ............... 4 Micro SD Card Installation............. 5 Manual Zoom Lens Focus Operation ..........

  • Page 5: Structure

    1 Structure 1.1 Multi-function Combination Cable Figure 1- 1 The multi-function cable is in Figure 1- 1. Please refer to the following sheet for corresponding information. Port Port Name Connector Description Network port Ethernet Connect to Ethernet cable. DC12V Power input Power port, input 12V DC.

  • Page 6: Bidirectional Talk

    Figure 1- 3 Figure 1- 4 1.3 Bidirectional Talk...

  • Page 7: Device-End To Pc-End

    1.3.1 Device-end to PC-end Device Connection Please connect the speaker to the audio input port of the PC. Login the Web and then click the Talk button to enable the bidirectional talk function. You can see the button becomes orange after you enabled the bidirectional talk function. Click Talk button again to stop the bidirectional talk function.

  • Page 8: Installation

    2 Installation Important  Before you complete the installation and setup, do not remove the electrostatic attraction film on the transparent enclosure. Otherwise it may result in injury.  After remove electrostatic attraction film, do not touch dome enclosure in case it may leave stain.

  • Page 9: Micro Sd Card Installation

    of the plastic expansion bolts according to the diagram. Take three expansion bolts from the accessories bag and then insert them to the holes you just dug and then fix firmly. If you need to dig a hole to pull through the cable on top of installation surface, you need to dig a cable exit hole on the installation surface according to the installation positioning diagram.

  • Page 10: Manual Zoom Lens Focus Operation

    Please unplug the device power cable and then shutdown the device before you install the Micro SD card. Please make sure the wire between power panel and device motherboard is firm, otherwise may cause abnormity. Please put the enclosure back and fasten the screws tightly to prevent dust. Step 1 Please refer to Step 1 in chapter 2.2 to open the device protection enclosure.

  • Page 11: Quick Configuration Tool

    3 Quick Configuration Tool 3.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 3.2 Operation Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 3- In the device list interface, you can view device IP address, port number, subnet mask,...
  • Page 12 Figure 3- 2 Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 3- 3. Figure 3- 3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set.
  • Page 13 Figure 3- 4 After you logged in, the configuration tool main interface is shown as below. See Figure 3- Figure 3- 5 For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.

  • Page 14: Web Operation

    4 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 4.1 Network Connection Please follow the steps listed below for network connection. ...
  • Page 15 Figure 4- 2 If it is your first time to login in, system pops up warning information to ask you whether install control webrec.cab or not after you logged in for one minute. Please click OK button, and system will automatically install the control. When system is upgrading, it will overwrite the previous Web too.

  • Page 16: Panorama Function On Web

    Figure 4- 4 Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. 4.3 Panorama Function on Web There is a panorama icon at the lower-left corner of web interface and you can click it to view installation mode and display mode at the right.

  • Page 17: Display Mode

    Figure 4- 5 4.3.2 Display Mode There are four modes: 360° 1-window, dual-picture panorama, 1-window and 90° 4-window  360° 1-window: It takes the whole panorama and is one-window 360 degrees panorama.  Dual-picture panorama: It is the dual-window 180 degrees panorama. ...

  • Page 18: Faq

    5 FAQ Solution I cannot boot up Please click RESET button for at least five seconds to restore the device. factory default setup. Do not set the Micro SD card as the storage media to store Micro card the schedule record file. It may damage the Micro SD card write times duration.

  • Page 19: Appendix Toxic Or Hazardous Materials Or Elements

    Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE ○ ○ ○ ○ ○ ○ Circuit Board Component ○ ○ ○ ○ ○ ○ Device Case ○ ○ ○ ○ ○ ○...

Table of Contents