Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for GATEQ ENAV-6520i
- Page 1 ENAV-6520i...
-
Page 2: Table Of Contents
Operations..15 The content of the publication will change according to the update of 5.1 Direction on radio operation........15 equipment. Gateq Ltd. preserves right to add and rectify the content without 5.2 Direction on DVD/VCD play operation......16 further notice. 5.3 Direction on CD /MP3 play operation ......18... -
Page 3: Chapter I Use Safety And Notice
Chapter I Use Safety and Notices 7. Do not put the remote of the machine in your car randomly, or else the fallen of remote may clock foot brake and cause accident. Please read the operation direction carefully before using the machine, 8. -
Page 4: Notices On Disc Use
1.3 Notices on disc use: 5. Do not use the machine under the environment that is of too much water or powder, especially keep water away from the machine in rainy day or when washing vehicle. Notice: the working temperature of the machine is -20¡« 70¡æ. 6. -
Page 5: Chapter Iii Appeareance And Function Keys
3.2 Introduction to key-press/interface function: Notice: the actual content may inconsistent with the above, please check for actual content. Chapter III. Appearance and Function Keys 3.1 Introduction on the remote function keys £¨ Diagram of BASE side after the panel sliding down£© Notice: 1.The definition of the remote keys in navigation status... -
Page 6: Output Interfaces Of Back Panel
3.3 Output interface of back panel Definition of the panel key-press and their functions: Press it to confirm in “SET UP” menu. Press it to play/pause while play audio media Definition of RCA Input & Output interfaces:... -
Page 7: Chapter Iv. Direction On Basic Function
Chapter IV. Direction of Basic Functions Speaker Wire/Power Wire definition of interfaces: 4.1 Turn on /off machine 4.1.1 Turn on machine The product applies automatic flexible LCD. The screen will return to preset when turning on/off: 1) Press power key ( on panel or on remote)for a while can Open The machine. -
Page 8: Volume Control
4.3 Screen flex: Press “ ”“ ” on panel or “? ”“? ” on remote can adjust the flexible angle of screen. The maximum angle is 22°. Notice: the above keys are unavailable in system set operation. 4.4 Volume control Press “... - Page 9 4.8.2 Audio set menu 4.8.4. Radio set Click the Radio on screen to enter into radio setting interface, which is: The method for the parameter set of this interface is the same with 4.8.2 4.8.5. System set Click the System on screen to enter into system setting interface, which is: 4.8.3.
-
Page 10: Direction On Radio Operation
Chapter V. Direction on multimedia play operation 5.2 Direction on DVD/VCD playing operation: 5.1 Direction on radio operation 1. Press the entrance key on remote or panel, the panel will slide down, Press on panel or on remote in any mode to enter into the last and the system will read disc, recognize the type of disc, and play the radio status directly. -
Page 11: Direction On Cd /Mp3 Play Operation
5.3 Direction on CD /MP3 play operation 1. Under other status, MOD key can shift to read the audio file in CD/MP3 file or USB disk. 2. Press the entrance/exit key on remote or panel can make panel slide down. The system will read disc automatically when there is disc in. 3. -
Page 12: Direction On Picture Play Operation
5.4 Direction on picture play operation The system is available for JPG/BMP/GIF pictures, you can save pictures in CD or USB disk. The picture play interface is: MP3 playing is taken through the buttons of panel or remote. Mp3 playing interface & operation is:... -
Page 13: Direction On Cdc Operaton
Directions on effective keys and play operations are: 5.5 Direction on CDC operation Under other statuses, press MOD key can shift to CDC operation status, and the interface: 5.6 Direction on external connection signal source The system interface will display the built-in interface of external connection equipment if the external equipment (such as DVD and television) accesses signal through AV IN., and you can take operation by external connection equipment directly. -
Page 14: Special Set For Disc Play System
5.7 Special set for disc play system Set interface and parameters of different terms: Except for the universal system set terms specified in 4.8, the system is available for term set for disc play (DVD/CD/MP3). Press on remote under disc play interface to enter into setting page menu, and the interface is: Press “... -
Page 15: Chapter Vi. Simple Trouble Analysis
Chapter VI. Simple Troubles Analysis Set interface and parameters of different terms: 6.1 Can not turn of/off normally 1. Please check the 12V power, system connection plug, and system fuse if the machine can not turn on normally. 2. If the machine is reposition or turns off automatically, there may be mistake in system. -
Page 16: Chapter Vii.technical Specification
Chapter VII. Technical Specification Chapter VIII. Installation Direction Warning! £º Please read the safety notices specified in the Chapter II carefully before installing the machine. Our company suggests you to invite professional personnel to install the machine. The installation made by the personnel without training may cause accident. -
Page 17: G P S A N T E N N A I N S T A L L A T I O
8.2 GPS antenna installation: Do not cut the lead of GPS antenna for shorting or increasing the antenna, changing the lead of antenna may damage its function. Receive antenna shall be installed on the horizontal position in the diagram, which shall not hamper the receiving of satellite wireless Signal. -
Page 18: I N I T I A T I O N A F T E R I N S T A L L A T I O
8.3 Initiation after installation Switch on the power of vehicle to get the first power on for the machine after all the wires are connected and no mistake after check. The system will enter into initiation interface automatically, which will last about one minute. The initiation interface is: You can take normal operation according to the direction specified in Chapter VI after initiation. - Page 19 GATEQ ENAV-6520i USER MANUAL...
Need help?
Do you have a question about the ENAV-6520i and is the answer not in the manual?
Questions and answers