Charging The Battery Pack; Power Options; Powering Off - HCL MP10 User Manual

Hcl me tablet pc
Table of Contents

Advertisement

User's Guide

Charging the Battery Pack

Before you use your Tablet PC you will have to charge the battery pack. The battery pack begins to charge as
soon as the Tablet PC is connected to external power using the power adapter. Fully charge the battery pack
before using it for the first time. A new battery pack must completely charge before the Tablet PC is
disconnected from external power. It takes a few hours to fully charge the battery when the Tablet PC is
turned OFF and may take twice the time when the Tablet PC is turned on. The battery charge light turns OFF
when the battery pack is charged.
Note:
The battery stops charging if the temperature is too high or the battery voltage is too high.

Power Options

The power switch turns ON and OFF the Tablet PC or putting the Tablet PC into sleep mode. Actual behavior
of the power switch can be customized in Windows Control Panel "Power Options."
For other options, such as " Sleep, Hibernate or Shut Down" touch the arrowhead icon.
Restarting or Rebooting
After making changes to your operating system, you may be prompted to
restart the system. Some installation processes will provide a dialog box to
allow restart. To restart the system manually, touch Windows Start button
and select "Restart" by touching the arrow as shown in figure.

Powering Off

In Windows 7, power OFF the Tablet PC by touching Windows Start button
and touch the shutdown icon. And for other option touch the arrowhead
icon and select respective options as shown in figure.
Getting Started
3-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Me mp10

Table of Contents