IMPORTANT SAFETY INSTRUCTIONS: WARNINGS: • Read,understandandfollowallinstructions,cautionsandwarnings listed in this manual. Failure to follow all instructions and abide by all cautions and warnings could result in personal injury, injury to others and property damage. • Use this product with 12 Volt Sockets ONLY. DO NOT connect to 6 Volt or 24 Volt DC Batteries (only use in 12V DC sockets rated at 20 Amps or higher) •...
LOCATION OF CONTROLS: 10. Clock battery compartment 9. USB on-off switch 8. USB power socket 6. Heat/Cool Mode Switch 7. DC 12 Volt power socket 11.Digital timer/clock 5. Main Power switch ON/OFF of heater 12. Charging indicator (Red) 4. AC/DC 13.
Battery Mode: To use the heater in rechargeable battery mode, it must be fully charged before use. Please charge the product without delay after every use. Follow the battery charging instruction provided in this manual. You can charge the rechargeable battery with the 12 Volt charging cable or with the AC charger.
Switching the Heater automatically: To use the heater in automatic mode, press the "S" button and keep it pressed down for 3 seconds. If the symbol "C" appears on the display, the timer is locked. Press the "S" button again and keep it pressed down for 3 seconds and the timer will be unlocked.
Notes for operation at automatic mode: 1. Do NOT turn off the main switch (5) of the heater, otherwise the heater will not turn on at the preselected time. 2. Since the operating time in rechargeable battery mode is limited, you can connect the heater to the cigarette lighter socket of your vehicle if you would like to extend the operating time.
Troubleshooting: 1. Check whether the contacts in the vehicle's 12 Volt socket are clean and clean them if necessary. 2. Check in the vehicle's fuse block whether the fuse used for the 12 Volt socket is intact. Replace it if necessary. 3.
Need help?
Do you have a question about the HeatZone 2060 and is the answer not in the manual?
Questions and answers