Optus GlobeSurfer III Express Set-Up Manual page 3

4. Log into the GlobeSurfer III:
®
Open your web browser and go to http://192.168.1.1
tip: Save the link (URL) to this page as a favourite in your Browser. Then you can easily access
the GlobeSurfer III Management Console in future.
®
5. Welcome to GlobeSurfer III Installation Wizard:
®
Click "Next" on the welcome page
6. Login Setup:
Now choose and confirm a username and a password. This will allow you access to the
management console at a later stage.
tip: Record your User Name and Password here for future reference:
USeR NAMe:
PASSWORD:
Click when you're done.
"Next"
NOtE: If you forget your username or password, you can reset the GlobeSurfer
in the "reset" button with a paper clip, however all GlobeSurfer
You'll find the reset button on the bottom of the unit near the SIM card slot.
III by pushing
®
III settings will also be reset.
®
7. Language:
Confirm that the language and time zone are correct and click "Next".
8. Telephony:
Confirm that "Australia" is selected as the Caller ID and click "Next".
9. UMTS (Access Point Name)
You need to ensure the correct APN (access point name) is configured for your Optus
mobile broadband service.
Optus Mobile Broadband (My Biz Wireless plans) – enter access point name connect