Important Recommendation - TAG Heuer DOCKING GPS User Manual

2. Important recommendation


To guarantee the security of your timekeeping, it is necessary to use your CP 540 with the internal
batteries in a charged state

Do not forget to charge the Docking before its use (see « How to charge the Docking »)

If the system is not used for several days, we recommend you to disconnect the Docking from the
Chronoprinter, and remove the batteries from the CP 540.

Do not forget to replace the « red blanking plug into the DOCKING » on the CP 540 to protect its
connector.

Protect the Docking with its original packing.
IMPORTANT
It is essential to update the software inside the CP 540 + Docking before initial use.
You will find the software version on our internet site (www.tagheuer-timing.com).
3. Docking connection

Remove the « DOCKING red blanking plug » from the CP 540 which gives access to the docking
connector.

Place the « DOCKING red blanking plug » on the Docking at the reserved place under the female
connector.

Place the CP 540 on the DOCKING and press firmly to ensure a good connection.