Alternate Switching Jacks - Diamond Decada Owner's Manual

right when facing the front panel. The front panel switches are made to override the
footswitch in the event of an emergency (probably caused by your bass player).

ALTERNATE SWITCHING JACKS

Your amp is also equipped with 3 1/4" alternate switching jacks on the back panel. This
allows you to control your amp with any device that conducts simple latching tip to ground
switching functions (e.g., the Diamond Amplification/RJM Music MAC-2, a Bradshaw (Custom
Audio Electronics) switching system, an RJM Music Amp Gizmo, a TC Electronic G-System,
a GCX switching system or a simple latching footswitch). The three jacks correspond exactly
with the front panel switches.
To get the most of your amp if you're a MIDI kinda player, we recommend our MAC-2, which
will allow you to use these jacks and switch your amp with any standard MIDI controller!
MIDI In/Thru also allows you to control your MIDI effects and your amp at the same time from
one controller. See our website for more detail.
DECADA owner's manual Page 13 of 18