Strong signal in some places, weak in the remaining locations
It means that power is unevenly distributed due to irregularities due to the internal antenna. If the signal is weak in
several positions, you can distribute a line from the amplifier, so many places to be covered properly by using a
splitter and extra indor antennas - but should be taken into account that the signal emitted by many indoor antennas
will subside and then you will need to use a repeater with higher output power and gain.
Low signal all over the place
If the system was correctly installed, it means that the repeater is too weak and need to be replaced with a more
powerful one
Safety instructions
Do not handle with wet hands. Do not use if the casing, cable or plugs are damaged.
Do not leave the charger unattended during use
Do not allow to be used by children.
ATTENTION!
Commissioning of the system to amplify the signal prior to ensure that they complied with all the steps of installation,
draws from the loss of warranty!
Power cord and PE bag can cause death by asphyxiation in infants!
All transformations performed in its own sphere can cause worsening of safety and operational performance and may
jeopardize the safety of the user or damage to the corresponding systems
Need help?
Do you have a question about the RF repeater and is the answer not in the manual?