protech 84-25054-01 Installation Operation & Maintenance

protech 84-25054-01 Installation Operation & Maintenance

Duct mount humidifier

Advertisement

Warranty

Limited Warranty

This product comes with a two (2) year limited warranty on parts. The warranty provides that
a replacement will be furnished for any part of the product that fails in normal use and service
during the applicable warranty period specified, in accordance with the warranty's terms. The
replacement part is warranted for only the unexpired portion of the original warranty.
All parts are warranted for a period of TWO (2) YEARS after the effective date. The effective
date is the date of installation if properly documented. Otherwise, it is the date of
manufacture plus twenty four (24) months.
STANDARD PROVISIONS AND CONDITIONS
The following terms are common to all of PROSTOCK'S individual product warranties.
THIS WARRANTY WILL NOT APPLY: a) to defects or malfunctions resulting from failure to
properly install, operate or maintain the unit in accordance with the manufacturer's printed
instructions; b) to damage from abuse, accident, fire, flood, and the like; c) to parts used in
connection with normal maintenance, such as cleaning or replacing air filters; d) to units that
are not installed in the United States of America or Canada; e) to units that are not installed
in accordance with applicable local codes, ordinances and good trade practices; or f) to defects
or damage caused by the use of any attachment, accessory or component not authorized by
PROSTOCK.
SHIPPING COSTS: You will be responsible for the cost of shipping warranty replacement parts
from our factory to our PROSTOCK distributor and from the distributor to the location of your
product. You also are responsible for any shipping cost of returning the failed part to the
distributor. (If in Alaska, Hawaii, or Canada, you also must pay the shipping cost of returning
the failed part to the port of entry into the continental U.S.)
SERVICE LABOR RESPONSIBILITY: This Warranty does not cover any labor expenses for service,
nor for removing or reinstalling parts. All such expenses are your responsibility, unless a service
labor agreement exists between you and your contractor.
HOW TO OBTAIN WARRANTY PERFORMANCE: You must promptly report any failure covered
by this warranty to the installing contractor or distributor. Normally, the installing contractor
from whom the unit was purchased will be able to take the necessary corrective action by
obtaining through his PROSTOCK distributor any replacement parts. If the contractor is not
available, simply contact any other local contractor handling PROSTOCK products.
The name and location of a local contractor can usually be found in your telephone directory
or by contacting a PROSTOCK distributor. If necessary, the following PROSTOCK office can
advise you of the nearest PROSTOCK distributor:
P.O. Box 17010 • Fort Smith, Arkansas 72917-7010 • (479) 648-4786 • (For CA only: (866) 251-4090)
HOWEVER, ANY REPLACEMENTS ARE MADE SUBJECT TO VALIDATION BY PROSTOCK OF IN-
WARRANTY COVERAGE.
An item to be replaced must be made available in exchange for the replacement.
MISCELLANEOUS: No one is authorized to make any warranties on behalf of PROSTOCK. ANY
IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, SHALL NOT EXTEND BEYOND THE APPLICABLE WARRANTY PERIODS SPECIFIED
ABOVE, PROSTOCK SOLE LIABILITY WITH RESPECT TO DEFECTIVE PARTS SHALL BE AS SET
FORTH IN THIS WARRANTY, AND ANY CLAIMS FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARE EXPRESSLY EXCLUDED. Some states do not allow limitations on how long an
implied warranty lasts, or for the exclusion of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
This Warranty gives you specific legal rights, and you may also have other rights that vary from
state to state.
P.O. Box 17010 • 3900 South Zero Street • Fort Smith, Arkansas 72917-7010
Phone: (479) 648-4786 (For CA only:
(866) 251-4090
)
14
Duct Mount
Humidifier
84-25054-01
Installation • Operation • Maintenance
CAUTION:
READ INSTALLATION, OPERATION, AND MAINTENANCE
INSTRUCTIONS CAREFULLY FOR SAFE OPERATION.
EXERCISE EXTREME CAUTION WHEN WORKING WITH
ELECTRICITY.
252907-003 4/04

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 84-25054-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for protech 84-25054-01

  • Page 1: Limited Warranty

    Otherwise, it is the date of manufacture plus twenty four (24) months. STANDARD PROVISIONS AND CONDITIONS 84-25054-01 The following terms are common to all of PROSTOCK’S individual product warranties. THIS WARRANTY WILL NOT APPLY: a) to defects or malfunctions resulting from failure to properly install, operate or maintain the unit in accordance with the manufacturer’s printed...
  • Page 2 Table of Contents Unit Diagram Introduction ........1 Specifications ........2 Capacity Selection Guide......3 Operation ..........3 Installation ..........5 Mounting Locations ......6 Maintenance ........7 Troubleshooting ........9 Description of Parts ......11 Parts List ..........12 Unit Diagram ........13 Warranty..........14...
  • Page 3 Vendor Number lower temperature (i.e.: 68° F) at 30-40% Relative Humidity (RH) than at 71° to 72° F without Assembly 84-25054-01 351453-006 controlled humidity. Since every degree of temperature setback represents about 3% of your heating costs, this can possibly represent a significant annual savings.
  • Page 4: Specifications

    Specifications Description of Parts To improve the efficiency of your humidifier, and to reduce the possibility of a health hazard, it is recommended that you take the following precautions: Description of Parts • Follow the manufacturer’s recommended cleaning and maintenance instructions. Solenoid Valve •...
  • Page 5: Troubleshooting

    Troubleshooting Capacity Selection Guide Troubleshooting Guide Air Tightness of Home Sq. Footage of Tight Home Average Home Loose Home Symptom Possible causes Corrective Action Home (GPD) (GPD) (GPD) Humidity level is not Evaporator pad is clogged Replace the evaporator pad 1000 10.0 being maintained...
  • Page 6 Operation Troubleshooting Start Up Common Questions & Answers 1. Open the saddle valve and check for leaks at the connections. Q. My humidity is too low. Why isn’t the humidifier working? 2. Turn the furnace on and check for proper operation. A.
  • Page 7 Maintenance Installation See installation instructions on the provided mounting template To Inspect and Replace the Evaporator Pad: It is recommended that the evaporator pad in the humidifier be replaced annually to Read the instructions in the furnace installation manual carefully before attempting installation maintain efficient operation.
  • Page 8: Mounting Locations

    Mounting Locations Maintenance 1. This humidifier may be installed on either the supply or return plenum. Maintenance of Your Humidifier The supply plenum is the preferred location because of higher evaporative capacity results. Your humidifier, as all appliances, requires periodic cleaning and maintenance to ensure efficient When there is insufficient space on the warm air plenum, the unit can be installed on the and safe operation.

Table of Contents