Setting The Af Mode During Live View - Ricoh Pentax K-S2 Operating Manual

Setting the AF Mode during Live View

1
Press G in standby mode in Live View.
2
Select [Contrast AF] and press E.
The [Contrast AF] screen appears.
3
Select an autofocus mode
and press E.
Detects and tracks faces of people.
Face
e
The main face detection frame for AF
Detection
and AE is displayed in yellow.
Tracks the subject in focus.
f Tracking
The shutter can be released even if the
subject is not in focus.
Sets the focusing area to the desired area.
The sensor is divided into 35 areas
Multiple (7 horizontal by 5 vertical), and you can
g
AF Points select a wider or narrower focusing area
by using 35, 25, 15, 9, or just 1 of those
35 areas available.
h Select Sets the focusing area by the pixel.
Sets the focusing area to a limited area
i Spot
at the center.
The control panel reappears.
4
Press F.
The camera returns to standby mode.
If you selected g or h in Step 3, proceed to Step 5.
5
v/A3
6
Contrast AF Contrast AF
Face Detection Face Detection
Cancel Cancel OK OK
7
u Caution
• When f is selected, the focus lock operation (composition
t Memo
• When g or h is selected, the E lamp lights up.
• The setting can also be changed from [Contrast AF]
• The autofocus mode is fixed to e in R mode and b,
• When [Focus Peaking] is set to [On] in the control panel or
Press and hold E.
Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
ABCD Changes the position of the AF area.
Increases/reduces the size of the AF
R
area (when g is selected).
M Returns the AF area to the center.
Press E.
The AF area is set.
adjustment with the half press of 0) does not work.
of [Live View] in the A3 menu.
f, and p of S mode.
[Live View] of the A3 menu, the outline of the subject in
focus is emphasized and makes it easier to check the focus.
This function works in both v and w modes.
OK OK
3
57